Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
首页 >>> MCNIX >>> MX29F100BTA-12 数据手册

MX29F100BTA-12 数据手册 ( 数据表 )

零件编号产品描述 (功能)生产厂家
MX29F100BTA-12 1M-BIT [128Kx8/64Kx16] CMOS FLASH MEMORY MCNIX
Macronix International MCNIX
Other PDF  not available.
PDF DOWNLOAD     
MX29F100BTA-12 image

GENERAL DESCRIPTION
The MX29F100T/B is a 1-mega bit Flash memory organized as 131,072 bytes or 65,536 words. MXICs Flash memories offer the most cost-effective and reliable read/write non-volatile random access memory. The MX29F100T/B is packaged in 44-pin SOP and 48-pin TSOP. It is designed to be reprogrammed and erased in-system or in-standard EPROM programmers.

FEATURES
• 5V±10% for read, erase and write operation
• 131072x8/ 65536x16 switchable
• Fast access time:55/70/90/120ns
• Low power consumption
    - 40mA maximum active current(5MHz)
    - 1uA typical standby current
• Command register architecture
    - Byte/ Word Programming (7us/ 12us typical)
    - Erase (16K-Bytex1, 8K-Bytex2, 32K-Bytex1, and 64K-Byte x1)
• Auto Erase (chip) and Auto Program
    - Automatically erase any combination of sectors or with Erase Suspend capability.
    - Automatically program and verify data at specified address
• Status Reply
    - Data polling & Toggle bit for detection of program and erase cycle completion.
• Compatibility with JEDEC standard
    - Pinout and software compatible with single-power supply Flash
    - Superior inadvertent write protection
• Sector protection
    - Hardware method to disable any combination of sectors from program or erase operations
    - Sector protect/unprotect for 5V only system or 5V/ 12V system
• 100,000 minimum erase/program cycles
• Latch-up protected to 100mA from -1 to VCC+1V
• Boot Code Sector Architecture
    - T = Top Boot Sector
    - B = Bottom Boot Sector
• Low VCC write inhibit is equal to or less than 3.2V
• Package type:
    - 44-pin SOP
    - 48-pin TSOP
• Ready/Busy pin(RY/BY)
    - Provides a hardware method or detecting program or erase cycle completion
• Erase suspend/ Erase Resume
    - Suspend an erase operation to read data from, or program data to a sector that is not being erased, then resume the erase operation.
• Hardware RESET pin
    - Hardware method of resetting the device to reading the device to reading array data.
• 20 years data retention

 

与其他制造商的搜索 'MX29F100BTA-12'

零件编号产品描述 (功能)PDF生产厂家
MX29F100B 1M-BIT [128Kx8/64Kx16] CMOS FLASH MEMORY 视图 Macronix International
MX27L1000MC-10 1M-BIT [128Kx8] LOW VOLTAGE OPERATION CMOS EPROM 视图 Macronix International
MX29LV081B 8M-BIT [1M x 8] CMOS SINGLE VOLTAGE 3V ONLY EQUAL SECTOR FLASH MEMORY 视图 Macronix International
MX29LV081 8M-BIT [1M x 8] CMOS SINGLE VOLTAGE 3V ONLY EQUAL SECTOR FLASH MEMORY 视图 Macronix International
NX29F010 1M-BIT (128K x 8-bit) CMOS, 5.0V Only ULTRA-FAST SECTORED FLASH MEMORY 视图 Unspecified
NX29F010 1M-BIT (128K x 8-bit) CMOS, 5.0V Only ULTRA-FAST SECTORED FLASH MEMORY 视图 NexFlash -> Winbond Electronics
EN29LV160C 16 Megabit (2048K x 8-bit / 1024K x 16-bit) Flash Memory Boot Sector Flash Memory, CMOS 3.0 Volt-only 视图 Eon Silicon Solution Inc.
25X10BLIG 1M-BIT, 2M-BIT AND 4M-BIT 2.5V SERIAL FLASH MEMORY WITH 4KB SECTORS AND DUAL I/O SPI 视图 Winbond
MBM29F080A FLASH MEMORY CMOS 8M (1M ×8) BIT 视图 Fujitsu
MBM29F080A FLASH MEMORY CMOS 8M (1M ×8) BIT 视图 Spansion Inc.

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]