Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits
首页 >>> Pericom-Semiconductor >>> PI74ALVCH16374 数据手册

PI74ALVCH16374 数据手册 ( 数据表 )

零件编号产品描述 (功能)生产厂家
PI74ALVCH16374 16-Bit Edge Triggered D-Type Flip-Flop with 3-State Outputs Pericom-Semiconductor
Pericom Semiconductor Pericom-Semiconductor
Other PDF  not available.
PDF DOWNLOAD     
PI74ALVCH16374 image

Product Description
Pericom Semiconductors PI74ALVCH series of logic circuits are produced in the Companys advanced 0.5 micron CMOS technology, achieving industry leading speed.
This 16-bit edge-triggered D-type flip-flop is designed for 2.3V to 3.6V VCC operation.
The PI74ALVCH16374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. This device can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the Clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs. OE can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high impedance state. In that state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and the increased drive provide the capability to drive bus lines without need for interface or pullup components. OE does not affect internal operations of the flip-flop. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

Product Features
• PI74ALVCH16374 is designed for low voltage operation
• VCC = 2.3V to 3.6V
• Hysteresis on all inputs
• Typical VOLP (Output Ground Bounce)
   < 0.8V at VCC = 3.3V, TA = 25°C
• Typical VOHV (Output VOH Undershoot)
   < 2.0V at VCC = 3.3V, TA = 25°C
• Bus Hold retains last active bus state during 3-STATE
   eliminating the need for external pullup resistors
• Industrial operation at -40°C to +85°C
• Packages available:
   - 48-pin 240 mil wide plastic TSSOP (A)
   - 48-pin 300 mil wide plastic SSOP (V)

Page Links : 1  2  3  4  5 
 

与其他制造商的搜索 'PI74ALVCH16374'

零件编号产品描述 (功能)PDF生产厂家
LVC16374 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS 视图 Texas Instruments
SN74ALVC16374 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS 视图 Texas Instruments
74AVC16374DGGRE4 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS 视图 Texas Instruments
LD374A 16-Bit Edge-Triggered D-Type Flip-Flop With 3-State Outputs 视图 Texas Instruments
74ALVCH16374DLG4 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS 视图 Texas Instruments
74ALVCH162374DLG4 16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS 视图 Texas Instruments
74LVC16374A 16-bit edge triggered D-type flip-flop with 5 Volt tolerant inputs/outputs (3-State) 视图 Philips Electronics
74AC11874 DUAL 4-BIT D-TYPE EDGE-TRIGGERED FLIP-FLOP WITH 3-STATE OUTPUTS 视图 Texas Instruments
74AVC16374 16-bit edge triggered D-type flip-flop; 3.6 V tolerant; 3-state 视图 Philips Electronics
CH374A 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS 视图 Texas Instruments

Share Link : 
All Rights Reserved© datasheetq.com 2015 - 2019  ] [ Privacy Policy ] [ Request Datasheet  ] [ Contact Us ]