P/N +描述+內容搜索

GENERAL DESCRIPTION
The ADV7614 is a high quality, single-chip integrated 4:1 multiplexed High-Definition Multimedia Interface (HDMI™) receiver.
The ADV7614 incorporates a quad input HDMI 1.3-compatible receiver that supports all HDTV formats up to 1080p and displays resolutions up to UXGA (1600 × 1200 at 60 Hz). The reception of encrypted video is possible with the inclusion of HDCP. The HDMI receiver also includes programmable/adaptive equalization that ensures robust operation of the interface with cable lengths up to 30 meters.

FEATURES
   Ultralow jitter digital PLL
   Quad HDMI Rx
      4:1 multiplexed HDMI receiver
      HDMI 1.3, DVI 1.0
      225 MHz HDMI receiver
      HDMI repeater support
      High-bandwidth digital content protection (HDCP 1.3)
      36-/30-/24-bit Deep Color support
      HDMI 1.3-compatible audio interface
      Programmable/adaptive equalizer for cable lengths up to
         30 meters
      Internal EDID RAM
      EDID with HDMI cable power support
      CEC support
   Audio support
      S/PDIF (IEC90658-compatible) digital audio output
      Super audio CD (SACD) with DSD output interface
      Compressed SACD with DST output interface
      High bit rate (HBR) audio
         Dolby TrueHD
         DTS-HD master audio
         DTS-HD high resolution audio
      On-board audio mute controller
   General
      Highly flexible output interface
      12-/10-/8-bit 4:4:4 or 12-/10-/8-bit 4:2:2 pixel output interface
      STDI function support standard identification
      Any-to-any 3 × 3 color space conversion matrixes
      Free-run time generator
      2 programmable interrupt request output pins
      Color controls
   Low standby power

APPLICATIONS
   Advanced TVs
      AVR video receivers
      PDP HDTVs
      LCD TVs (HDTV ready)
      OLED HDTVs
   LCD/DLP front projectors
   HDMI switchers

The SiI9136-3 transmitter is an HDMI® Deep Colour transmitter with 3D and 4K x 2K support for consumer electronics products such as set-top boxes, Blu-ray players and recorders, A/V Receivers, DVD players and recorders, personal video recorders, home theater-in-a-box systems, and home theater PCs.

The SiI9136-3 transmitter, with the latest generation 300 MHz TMDS™ core, enables home theatre devices to deliver up to 16-bit Deep Colour at 1080p/30 resolutions and up to 12-bit Deep Colour at 1080p/60 resolutions. On the audio side, High-Bitrate (HBR) audio formats (such as Dolby® TrueHD and DTS-HD) are supported for an enhanced digital audio experience.

Video Input

• Supports most common standard and non- standard video input formats


• Supports most common 3D formats


• Supports video resolutions up to 8-bit 4K (30 Hz), 12-bit 1080p (60 Hz), 12-bit 720p/1080i (120 Hz), and 16-bit 1080p (30 Hz)

Audio Input

• S/PDIF input supports PCM and compressed audio formats (Dolby Digital, DTS, AC-3)


• DSD input supports Super Audio CD applications (SACD)


• I²S input supports PCM, DVD-Audio input (up to 8-channel 192 kHz)


• High Bitrate audio support (for example, DTS HD and Dolby True HD)

HDMI Output

• DVI, HDCP, and HDMI transmitter with xvYCC extended color gamut, Deep Color up to 16-bit color, 3D, and HBR audio support


• 300 MHz HDMI Transmitter


• Supports all mandatory and some optional 3D modes


• Pre-programmed HDCP key set simplifies the manufacturing process, lowers cost, and provides the highest level of HDCP key security.

DESCRIPTION
An orange and green lamp made of GaAsP, GaP offering a changing color characteristics dependent on the direction the lamp is biased. These two light emitting diodes are mounted in 3mm Dual color, white diffused lens.

DESCRIPTION
An orange and green lamp made of GaAsP, GaP offering a changing color characteristics dependent on the direction the lamp is biased. These two light emitting diodes are mounted in 5mm diameter Dual color, white diffused lens.

DESCRIPTION
The DS1609 is a random access 256–byte Dual port memory designed to connect two asyncronous address/data buses together with a common memory element. Both ports have unrestricted access to all 256 bytes of memory, and with modest system discipline no arbitration is required. Each port is controlled by three control signals: output enable, write enable, and port enable. The device is packaged in plastic 24–pin DIP and 24–pin SOIC. Output enable access time of 50 ns is available when operating at 5 volts.

FEATURES
• Totally asynchronous 256–byte Dual port memory
• Multiplexed address and data bus keeps pin count low
• Dual port memory cell allows random access with minimum arbitration
• Each port has standard independent RAM control signals
• Fast access time
• Low power CMOS design
• 24–pin DIP or 24–pin SOIC surface mount package
• Both CMOS and TTL compatible
• Operating temperature of –40°C to +85°C
• Standby current of 100 nA @ 25°C makes the device ideal for battery backup or battery operate applications.

DESCRIPTION
The IDT7M1014 is a 4K x 36 asynchronous high-speed BiCMOS Dual-port static RAM module constructed on a cofired ceramic substrate using 4 IDT7014 (4K x 9) asynchronous Dual-port RAMs. The IDT7M1014 module is designed to be used as stand-alone 36-bit Dual-port RAM.

FEATURES
• High-density 4K x 36 BiCMOS Dual-port Static RAM module
• Fast access times
    — Commercial: 15, 20ns
    — Military: 25, 30ns
• Fully asynchronous read/write operation from either port
• Surface mounted LCC packages allow through-hole module to fit on a ceramic PGA footprint
• Single 5V (±10%) power supply
• Multiple GND pins and decoupling capacitors for maximum noise immunity
• Inputs/outputs directly TTL-compatible

DESCRIPTION
An orange and green lamp made of GaAsP, GaP offering a changing color characteristics dependent on the direction the lamp is biased. These two light emitting diodes are mounted in a rectangular 0.95mm x 4.90mm Dual color, white diffused lens.

DESCRIPTION
A red and green lamp made of GaAlAs, GaP offering a changing color characteristic dependent on the direction the lamp is biased. These two light emitting diodes are mounted in a rectangular 2mm x 5mm Dual color, white diffused lens.

DESCRIPTION
A yellow and green lamp made of GaAsP, GaP offering a changing color characteristic dependent on the direction the lamp is biased. These two light emitting diodes are mounted in a rectangular 2mm x 5mm clear Dual color, white diffused lens.

DESCRIPTION
A high efficiency red and green lamp made of GaAlAs, GaP offering a changing color characteristics dependent on the direction the lamp is biased. These two light emitting diodes are mounted in 3mm Dual color, white diffused lens.