P/N +描述+內容搜索

Integrated S12 Based Relay Driver with LIN

The MM912F634 is an integrated single package solution that integrates an HCS12 microcontroller with a SMARTMOS analog control IC. The Die to Die Interface (D2D) controlled analog die combines system base chip and application specific functions, including a LIN transceiver.



Features

• 16-Bit S12 CPU, 32 kByte FLASH, 2.0 kByte RAM

• Background Debug (BDM) & Debug Module (DBG)

• Die to Die bus interface for transparent memory mapping

• On-chip oscillator & two independent watchdogs

• LIN 2.1 Physical Layer Interface with integrated SCI

• Six digital MCU GPIOs shared with SPI (PA5…0)

• 10-Bit, 15 Channel - Analog to Digital Converter (ADC)

• 16-Bit, 4 Channel - Timer Module (TIM16B4C)

• 8-Bit, 2 Channel - Pulse width modulation module (PWM)

• Six high voltage / Wake-up inputs (L5.0)

• Three low voltage GPIOs (PB2.0)

• Low Power Modes with cyclic sense & forced wake-up

• Current Sense Module with selectable gain

• Reverse Battery protected Voltage Sense Module

• Two protected low side outputs to drive inductive loads

• Two protected high side outputs

• Chip temperature sensor

• Hall sensor supply

• Integrated voltage regulator(s)

Integrated S12 Based Relay Driver with LIN

The MM912G634 (48 kB) and MM912H634 (64 kB) are integrated single package solutions that integrates an HCS12 microcontroller with a SMARTMOS analog control IC. The Die to Die Interface (D2D) controlled analog die combines system base chip and application specific functions, including a LIN transceiver.

Features
• 16-Bit S12 CPU, 64/48 kByte P-FLASH,
• 6.0 kByte RAM; 4/2 kByte D-FLASH
• Background debug (BDM) & debug module (DBG)
• Die to Die bus interface for transparent memory mapping
• On-chip oscillator & two independent watchdogs
• LIN 2.1 Physical Layer Interface with integrated SCI
• 10 digital MCU GPIOs shared with SPI (PA7…0, PE1…0)
• 10-Bit, 15 Channel - Analog to Digital Converter (ADC)
• 16-Bit, 4 Channel - Timer Module (TIM16B4C)
• 8-Bit, 2 Channel - Pulse width modulation module (PWM)
• Six high voltage / Wake-up inputs (L5…0)
• Three low voltage GPIOs (PB2…0)
• Low power modes with cyclic sense & forced wake-up
• Current sense module with selectable gain
• Reverse battery protected voltage sense module
• Two protected low side outputs to drive inductive loads
• Two protected high side outputs
• Chip temperature sensor
• Hall sensor supply & integrated voltage regulator(s)

Low-Profle Safety Relay with Forcibly-Guided Contacts for Safety Applications!

Panasonic, a worldwide leader in Relay Products, is pleased to re-introduce the NEW SF-Y Series Safety Relays. Featuring a short, 14.5mm profle and forcibly-guided contacts, the SF-Y Series meets EN 50205, Type A safety standards enabling the detection of contact welding for the proper construction of a safety circuit. The SF-Y Series is available in four contact confgurations from 2 Form A / 2 Form B to 5 Form A / 1 Form B, covering a wide range of safety applications.

Features
• Forcibly-Guided Contacts
• Small Size, with 14.5mm Profle
• Insulation is Compliant with EN 60664-1
• Multiple Contact Confgurations Available
• RoHS Compliant

Benefts
• Meets EN 50205, Type A Safety Standards
• Small Profle for More Compact Board Placement
• Excellent Overvoltage Protection
• Wide Application Coverage

Industries
• Industrial Machinery
• Elevators

Applications
• Emergency Stop Switches
• Safety Control Units
• Elevator Control
• Escalator Control

FEATURES

• Power types added to DS Relay series

• High switching capacity: 1a: 8 A 250 V AC / 1a1b, 2a: 5 A 250 V AC

• High sensitivity: 190 mW pick-up power

• High contact welding resistance

• Latching types available

• High breakdown voltage 3,000 Vrms between contacts and coil

   1,000 Vrms between open contacts Meeting FCC Part 68

• Sealed types are standard

TYPICAL APPLICATIONS

Office and industrial electronic devices

• Terminal devices of information process ing equipment, such as printer, data re corder.

• Office equipment (copier, facsimile)

• Measuring instruments

• NC machines, temperature controllers  and programmable logic controllers.

FEATURES
• Compact, high-capacity, and
    resistant to inductive loads
    The Relay is a compact 16×30.4×26.5 mm
    .630×1.197×1.043 inch. It can control an
    inductive load (cosϕ = 0.7) with inrush
    current of 70 A and steady state current of
    20 A.
• Excellent contact welding resistance
    High contact pressure, a forced opening
    mechanism, and a forced wiping
    mechanism realizes an excellent contact
    welding resistance.
• High breakdown voltage and surge
    resistant Relay
    More than 6.4 mm .252 inch maintained
    for the insulation distance between contacts
    and coil, and the breakdown voltage
    between contacts and coil is 5,000 V for 1
    minute. In addition, the surge resistance
    between contacts and coil is greater than
    10,000 V.
• Resistant to external force
    An absorber mechanism is used on the
    load terminals, giving a large improvement
    in characteristics variations caused
    by the external force during FASTON
    placement/removal.
• Flux resistance mechanism
    The terminal area is plugged with resin to
    prevent flux seepage during PCB mounting. (TMP type)
• Conforms to the various safety standards
    UL, CSA approved.
    TÜV, VDE under application.
• The line up can support economical
    mounting methods.
    The Relay are equipped with a drive terminal
    (coil terminal) on one side for PCBs,
    and a load terminal (tab terminal #250) on
    the reverse side. The line up includes the
    TM type which can be attached directly to
    the PCB composing a drive circuit, and
    the TMP type which supports economical
    wiring. The TMP type can also be directly
    attached, and a high capacity load can be
    wired to the tab terminal.
               

FEATURES

1. Compact high-capacity control Relay

In the same external dimensions as an HC Relay, this compact power Relay enables high-capacity control: 15 A for 1 Form C, 10 A for 2 Form C.

2. Designed for high reliability

High operational reliability is achieved by solder-less construction, in which all connections between lead wires and the contact springs and terminal plate are welded.

3. Various types provided in rich

lineup. LED indicator type also available.

FEATURES
• Compact, high-capacity, and
    resistant to inductive loads
    It can control an inductive load with
    inrush current of 80 A and steady
    state current of 20 A.
• Excellent contact welding resistance
    High contact pressure, a forced opening
    mechanism, and a forced wiping
    mechanism realizes an excellent contact
    welding resistance.
• High breakdown voltage and surge
    resistant Relay
    More than 6.4 mm .252 inch maintained
    for the insulation distance between
    contacts and coil, and the breakdown
    voltage between contacts and coil is
    5,000 V for 1 minute. In addition, the
    surge resistance between contacts and
    coil is greater than 10,000 V.
• Resistant to external force
    An absorber mechanism is used on the
    load terminals, giving a large
    improvement in characteristics variations
    caused by the external force during
    FASTON placement/removal.
• Flux resistance mechanism
    The terminal area is plugged with resin to
    prevent flux seepage during PCB
    mounting. (TMP type)
• Conforms to the various safety
    standards
    UL, CSA, VDE available
• The line up can support economical
    mounting methods.
    The Relay are equipped with a drive
    terminal (coil terminal) on one side for
    PCBs, and a load terminal (tab terminal
    #250) on the reverse side. The line up
    includes the TM type which can be
    attached directly to the PCB composing a
    drive circuit, and the TMP type which
    supports economical wiring. The TMP
    type can also be directly attached, and a
    high capacity load can be wired to the tab
    terminal.
   
TYPICAL APPLICATIONS
• Compressor and heater control in
    air conditioners
• Power control in hot air type heaters
• Magnetron control in microwave
    ovens
• Lamp and motor control in
    OA equipment such as copiers and
    facsimiles.
   

The 1a/1c/2a/2c 5A/10A power Relay is best suited for power usage.

Features
● narrow and long installation area:
   Width (12.8mm) × Length (28.6mm) × Height (20mm)
● Obtain TV-5 certification (1a only)
● Available with standard type (5A) and high capacity type (10A)

Uses
● Household appliances
● Business equipment
● Industrial equipment
   TV, CATV, VTR, stereo, microwave, heater, etc.
   Copier, box type air conditioner, vending machine
   Processing equipment, robots, thermostats

FEATURES
• Compact, high-capacity, and resistant to inductive loads
   It can control an inductive load with
   inrush current of 80 A and steady
   state current of 20 A.
• Excellent contact welding resistance
   High contact pressure, a forced opening
   mechanism, and a forced wiping
   mechanism realizes an excellent contact
   welding resistance.
• High breakdown voltage and surge resistant Relay
   More than 6.4 mm .252 inch maintained
   for the insulation distance between
   contacts and coil, and the breakdown
   voltage between contacts and coil is
   5,000 V for 1 minute. In addition, the
   surge resistance between contacts and
   coil is greater than 10,000 V.
• Resistant to external force
   An absorber mechanism is used on the
   load terminals, giving a large
   improvement in characteristics variations
   caused by the external force during
   FASTON placement/removal.
• Flux resistance mechanism
   The terminal area is plugged with resin to
   prevent flux seepage during PCB
   mounting. (TMP type)
• Conforms to the various safety standards
   UL, CSA, VDE available
• The line up can support economical mounting methods.
   The Relay are equipped with a drive
   terminal (coil terminal) on one side for
   PCBs, and a load terminal (tab terminal
   #250) on the reverse side. The line up
   includes the TM type which can be
   attached directly to the PCB composing a
   drive circuit, and the TMP type which
   supports economical wiring. The TMP
   type can also be directly attached, and a
   high capacity load can be wired to the tab
   terminal.

TYPICAL APPLICATIONS
• Compressor and heater control in air conditioners
• Power control in hot air type heaters
• Magnetron control in microwave ovens
• Lamp and motor control in
   OA equipment such as copiers and facsimiles.

SP RelayS 2c 15A, 4c 10A polarized power Relays

FEATURES
1. Small, slim form factor
   Facilitating the form factor reduction of devices, the overall height of the Relay package is less than half that of our HP Relay.
2. High sensitivity
   The high-efficiency polarized electromagnetic mechanism in conjunction with our exclusive spring alignment method achieves levels of sensitivity higher than Relays that have been available up to now. For both the 2 Form C and 4 Form C single side stable and 2 coil latching types, the 150 mW minimum operating power level allows direct driving by transistor or chip controllers.
3. High reliability and long life
   With a structure that ensures almost perfectly complete twin contact and minimal contact bounce, you get greater reliability than has so far been provided by power Relays.
4. Latching types also available
   1 coil latching and 2 coil latching types are available. In cases where it was formerly unavoidable to use pluralRelays for large power memory, you can now use a single SP Relay.
5. Strong resistance to vibration and shock
   Our balanced armature technology well withstands vibration and shocks. It provides strong resistance to vibration and shock.
6. Terminals and mounting boards are available.