Ohmite power Tap Switches (high power rotary switches) are constructed to provide dependable, convenient operation. All Ohmite tap switches, from 15 to 100 amps, have ceramic arc-proof bodies and metal alloy contacts. Their all-soldered and all-riveted construction assures mechanical and operational integrity. Even the smallest Ohmite Tap Switch, rated at 7 amps, has a reinforced non-metal body and solid metal alloy contacts. These units feature high current handling capability in a small package.
FEATURES • “Slow-breaking, Quick-make” action proved best for switching AC current. • Non-shorting type disconnects previous circuit before establishing contact for succeeding tap. • Ceramic and metal construction provides resistance to arcing, burning and charring. • Tandem assemblies available as standard models. • UL listed for models 111, 212, 312 and 412 • RoHS compliant product available Jan. 2006 Add “E” suffix to part number to specify.
General Description The SM802104 is a member of the ClockWorks™ family of devices from Micrel and provides an extremely low-noise timing solution for Fibre Channel clock signals. It is based upon a unique, patented RotaryWave® architecture that provides very low phase noise. The device operates from a 3.3V or 2.5V power supply and synthesizes LVPECL output clocks at 106.25MHz or 212.5MHz. There are normally two clock outputs, but one output can be achieved by powering down the second output with the OE pin. The SM802104 accepts a 26.5625MHz crystal or LVCMOS reference clock.
Features • Generates one or two LVPECL clock outputs at 106.25MHz or 212.5MHz • 2.5V or 3.3V operating range • Typical phase jitter @ 106.25MHz (637kHz to 10MHz): 200fs • Industrial temperature range • Green, RoHS, and PFOS compliant • Available in 24-pin 4mm × 4mm QFN package
General Description The SM802116 is a member of the ClockWorks™ family of devices from Micrel and provides an extremely low-noise timing solution for Fibre Channel clock signals. It is based upon a unique patented RotaryWave® architecture that provides very-low phase noise. The device operates from a 3.3V or 2.5V power supply and synthesizes LVDS output clocks at 106.25MHz or 212.5MHz. There are normally two clock outputs, but one output can be achieved by powering down the second output with the OE pin. The SM802116 accepts a 26.5625MHz crystal or LVCMOS reference clock.
Features • Generates one or two LVDS clock outputs at 106.25MHz or 212.5MHz • 2.5V or 3.3V operating range • Typical phase jitter @ 106.25MHz (637kHz to 10MHz): 190fs • Industrial temperature range (–40°C to +85°C) • Green, RoHS, and PFOS compliant • Available in 24-pin 4mm × 4mm QFN package
DESCRIPTION: The MP60 series of power modules are economical 49W (nominal) switching DC:DC converters with an integral connector designed to Intel Corporation’s Voltage Regulator module specification for the Klamath Processor. The module has additional monitoring functions for Power Good Signal, Output Enable and Upgrade Present. The output voltage can be set between 1.8V and 3.5V by means of a five bit voltage identification code, to support current and future versions of the Pentium® Pro, Klamath and OverDrive® processor variants. To power Pentium® Pro processors (VRM 8.0) use MP60-E.
FEATURES: ● Integral 40-pin header connector ● Programmable output voltage to suit processor (by VID code); adjustable from 1.8 to 3.5V ● Maximum output current 14A ● Efficiency >80% at full load ● Designed to specifications for Intel Klamath Processor voltage Regulator module ● Fast transient response
General Description The 212 encoders are a series of CMOS LSIs for remote control system applications. They are capable of encoding information which consists of N address bits and 12-N data bits. Each address/data input can be set to one of the two logic states. The programmed addresses/data are transmitted together with the header bits via an RF or an infrared transmission medium upon receipt of a trigger signal.
Features • Operating voltage - 2.4V~5V for the HT12A - 2.4V~12V for the HT12E • Low power and high noise immunity CMOS technology • Low standby current: 0.1A (typ.) at VDD=5V • HT12A with a 38kHz carrier for infrared transmission medium • Minimum transmission word - Four words for the HT12E - One word for the HT12A • Built-in oscillator needs only 5% resistor • Data code has positive polarity • Minimal external components • Pair with Holteks 212 series of decoders • 18-pin DIP, 20-pin SOP package
Applications • Burglar alarm system • Smoke and fire alarm system • Garage door controllers • Car door controllers • Car alarm system • Security system • Cordless telephones • Other remote control systems
GENERAL DESCRIPTION SM5212E is a RF remote control encoder paired with SM5212D. It utilizes CMOS technology. The chip has 12 bits of 2-state address pins that provides 212 codes. SM5212E/SM5212D pair is suitable for use on remote controller.
FEATURES * CMOS technology * Low power consumption * Wide range operating voltage, Vcc = 2.4~12V * Up to four data bits * High noise immunity
APPLICATION * Car Security * Garage Door * Ceiling Fan * Home Security/Automatic * Toys * Wireless doorbell