M24512-W M24512-R M24512-DF
Instructions
5.1.1
Byte Write
After the device select code and the address bytes, the bus master sends one data byte. If
the addressed location is Write-protected, by Write Control (WC) being driven high, the
device replies with NoAck, and the location is not modified. If, instead, the addressed
location is not Write-protected, the device replies with Ack. The bus master terminates the
transfer by generating a Stop condition, as shown in Figure 7.
Figure 7. Write mode sequences with WC = 0 (data write enabled)
:&
%\WH:ULWH
$&.
$&.
$&.
$&.
'HYVHO
%\WHDGGU
%\WHDGGU
'DWDLQ
5:
:&
3DJH:ULWH
:&FRQW¶G
3DJH:ULWHFRQW¶G
$&.
$&.
$&.
$&.
'HYVHO
%\WHDGGU
%\WHDGGU
'DWDLQ
'DWDLQ
5:
$&.
$&.
'DWDLQ1
$,G
DS6520 Rev 30
15/47
46