NJM3774 查看數據表（PDF） - Japan Radio Corporation

零件编号

产品描述 (功能)

生产厂家

NJM3774

DUAL STEPPER MOTOR DRIVER

Japan Radio Corporation  

NJM3774

s FUNCTIONAL DESCRIPTION

Each channel of the NJM3774 consists of the following sections: an output H-bridge with four transistors, capable

of driving up to 1000mA continuous current to the motor winding; a logic section that controls the output transistors;

an S-R flip-flop; and a comparator. The clock-oscillator is common to both channels.

Constant current control is achieved by switching the output current to the windings. This is done by sensing the

peak current through the winding via a resistor, RS, effectively connected in series with the motor winding during the

turn-on period. As the current increases, a voltage develops across the resistor, and is fed back to the comparator.

At the predetermined level defined by the voltage at the reference input VR, the comparator resets the flip-flop,

turning off the output transistors. The current decreases until the clock oscillator triggers the flip-flop, turning on the

output transistors, and the cycle is repeated.

The current paths during turn-on, turn-off and phase shift are shown in figure 3. Note that the upper recirculation

diodes are connected to the circuit externally.

External recirculation diodes

1

VMM

2

3

RS

Motor Current

1

2

3

Fast Current Decay

Slow Current Decay

Time

Figure 3. Output stage with current paths

during turn-on, turn-off and phase shift.

Share Link: