Philips Semiconductors
PAL/NTSC/SECAM decoder/sync processor
Preliminary specification
TDA9160
QUALITY SPECIFICATION
Quality level according to URV 4-2-59/601.
SYMBOL
PARAMETER
ESD
protection circuit specification (note1)
Test and application information
EW output stage
In order to obtain the correct tracking
of the vertical and horizontal EHT
correction, the EW output stage
should be configured as illustrated in figure 8.
RANGE A
2000
100
1500
RANGE B
500
200
0
UNIT
V
pF
Ω
Fig.8 Configuration of the EW output stage.
Note to Fig.8
Resistor Rew determines the gain of the EW output stage. Resistor Rc sets the reference current for both the vertical
sawtooth generator and the geometry processor. The preferred value of Rc = 39 kΩ results in a reference current of 100
µA (Vref = 3.9 V).
The value of Rew is given in the following equation: Rew = Rc × --(--1---8---V--×--s--c-V--a--r-n-e---f---)---
Example: If Vref = 3.9 kΩ, Rc = 39 kΩ and Vscan = 120 V then Rew = 68 kΩ
December 1991
21