Product Specification
MF601HK
General Description
Features
The in-Line Micro filter has been specifically
designed to implement the functionality of low
♦Consist exclusively of passive element.
pass filter in G.Lite system.
G.Lite technology is similar to full rate ADSL in ♦Handle all POTS loop currents from
using DMT technology but operates at a lower 0mA to 100mA.
data rate of up to 1.5Mbps downstream and
512Kbps upstream ,depending on line conditions ♦Designed for implementation of ADSL
and lengths.
This in-line filter will block the high frequency
CPE application.
energy from reaching the POTS devices and
provide isolation from impedance effects of the
♦Provides excellent isolation between
POTS device on G.Lite.
DSL and POTS.
In addition , this filter will also attenuate any
wideband impulse noise generated by the POTS ♦Designed to meet G.Lite requirement.
device due to the interruption of loop current(e.g.
pulse dialing or on hook / off hook transition)
Specifications
Parameter
Filter order
Condition
Min. Typ. Max Unit
2
Impedance @300-4KHz
600Ω
Attenuation
DCR
Group delay
DC Current
@25KHz~50KHz -22
@50KHz~1100KHz -40
Each line
@0.6-3.2KHz
dB
dB
50 Ω
100 µs
100 mA
Longitudinal
balance
@0.2-3KHz
-58
dB
Insertion Loss @200Hz~4KHz
-1 dB
@300Hz~2000Hz -18
dB
Return loss
@2200Hz~3000Hz -14
dB
into line side
@3400Hz~3900Hz -12
dB
Return loss @300Hz~2000Hz -18
dB
into Phone @2200Hz~3000Hz -14
dB
side
@3400Hz~3900Hz -12
dB
Schematic
Data sheet subject to change without notice
RDPS-MF034(R0)01/03/2002
SHEET 2 OF 5