ADG774A 查看數據表（PDF） - Analog Devices

零件编号

产品描述 (功能)

生产厂家

ADG774A

0.3-6V; 556mW; low voltage 400MHz quad 21 mux with 3ns switching time

Analog Devices 

ABSOLUTE MAXIMUM RATINGS

TA = 25°C, unless otherwise noted.

Table 3.

Parameters

VDD to GND

Analog, Digital Inputs1

Continuous Current, S or D

Peak Current, S or D

Operating Temperature Range

Industrial (B Version)

Storage Temperature Range

Junction Temperature

Thermal Impedance, θJA

16-Lead QSSOP

16-Lead LFCSP(3 mm × 3 mm)

Lead Temperature Soldering

Vapor Phase (60 sec)

Infrared (15 sec)

Reflow Soldering (Pb-free)

Peak Temperature

Time at Peak Temperature

Rating

−0.3 V to +6 V

−0.3 V to VDD + 0.3 V or 30 mA,

whichever occurs first

100 mA

300 mA (pulsed at 1 ms,

10% duty cycle max)

−40°C to +85°C

−65°C to +150°C

150°C

105.44°C/W2

48.7°C/W2

215°C

220°C

260°C (+0°C/–5°C)

10 sec to 40 sec

1 Overvoltages at IN, S, or D are clamped by internal diodes. Current should be

limited to the maximum ratings given.

2 Measured with the device soldered on a four-layer board.

ADG774A

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those listed in the operational sections

of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability. Only one absolute maximum rating may be

applied at any one time.

ESD CAUTION

Rev. B | Page 5 of 16

Share Link: