EA2-12NU 查看數據表（PDF） - Unspecified

零件编号

产品描述 (功能)

生产厂家

EA2-12NU

Miniature Signal Relays

Unspecified 

Miniature Signal Relays – EA2/EB2 Series

Notes on Using Relays cont’d

• Latching relays are factory-set to reset state for shipment. A latching relay may be set, however, by vibration or shock applied

while being transported. Be sure to forcibly reset the relay before using it in the application set. Also note that the relay may be

set by unexpected vibration or shock when it is used in a portable set.

• The sealability of a surface mount (SMT) relay may be lost if the relay absorbs and is then heated during soldering. When storing

relays, therefore, observe the following points:

1. For standard packing, please use relays within 12 months after delivery (storage conditions: 30°C / 60% RH). If the relays

have moisture absorption, dehumidify as follows:

– Tape Packaging: 50 ±5°C, 200–300 hours.

– Simple Relay: 85 ±5°C, 48 hours.

2. For MBB packing, please use relays within 2 years after delivery (storage conditions: 30°C / 60% RH). After opening MBB

packing, please use within 3 months (storage conditions: 30°C / 60% RH).

© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com

R7001_EA2_EB2 • 2/27/2014 15

Share Link: