MAX1449 查看數據表（PDF） - Maxim Integrated
零件编号
产品描述 (功能)
生产厂家
MAX1449 Datasheet PDF : 18 Pages
| |||
10-Bit, 105Msps, Single +3.3V, Low-Power
ADC with Internal Reference
300Ω
300Ω
+5V
0.1µF
0.1µF
MAX4108
600Ω
-5V
0.1µF
600Ω
+5V
INPUT
0.1µF
MAX4108
-5V
0.1µF
300Ω
300Ω
0.1µF
600Ω
300Ω
300Ω
+5V
0.1µF
MAX4108
-5V
0.1µF
600Ω
LOWPASS FILTER
RISO
50Ω
CIN
22pF
IN+
MAX1449
COM
LOWPASS FILTER
IN-
RISO
50Ω
CIN
22pF
Figure 7. Typical Application Circuit Using the Internal Reference
the use of a split ground plane arranged to match the
physical location of the analog ground (GND) and the
digital output driver ground (OGND) on the ADC's
package. The two ground planes should be joined at a
single point, such that the noisy digital ground currents
do not interfere with the analog ground plane. The ideal
location of this connection can be determined experi-
mentally at a point along the gap between the two
ground planes, which produces optimum results. Make
this connection with a low-value, surface-mount resistor
(1Ω to 5Ω), a ferrite bead or a direct short. Alternatively,
all ground pins could share the same ground plane, if
the ground plane is sufficiently isolated from any noisy
digital systems ground plane (e.g., downstream output
buffer or DSP ground plane). Route high-speed digital
signal traces away from sensitive analog traces. Keep
all signal lines short and free of 90° turns.
Static Parameter Definitions
Integral Nonlinearity (INL)
Integral nonlinearity is the deviation of the values on an
actual transfer function from a straight line. This straight
line can be either a best straight-line fit or a line drawn
between the endpoints of the transfer function, once
offset and gain errors have been nullified. The static lin-
earity parameters for the MAX1449 are measured using
the best straight-line fit method.
14 ______________________________________________________________________________________
Share Link: 