MAX7060ATG 查看數據表（PDF） - Maxim Integrated
零件编号
产品描述 (功能)
生产厂家
MAX7060ATG Datasheet PDF : 31 Pages
| |||
MAX7060
280MHz to 450MHz Programmable
ASK/FSK Transmitter
ABSOLUTE MAXIMUM RATINGS
GPOVDD, VDD5 to GND.......................................-0.3V to +6.0V
DVDD, PAVDD, and AVDD to GND......................-0.3V to +4.0V
ENABLE, SCLK_PWR0, SDI_PWR1, DIN,
CS_DEV, LSHDN, FREQ0, FREQ1, FREQ2, GPO1,
and GPO2_MOD to GND......................-0.3V to (VDD5 + 0.3V)
PAOUT, ROUT,
and PAVOUT to GND ....................... -0.3V to (VPAVDD + 0.3V)
XTAL1 and XTAL2 to GND.................... -0.3V to (VAVDD + 0.3V)
Continuous Power Dissipation (TA = +70NC)
24-Pin Thin QFN
(derate 20.8mW/NC above +70NC)..........................1666.7mW
Operating Temperature Range......................... -40NC to +125NC
Storage Temperature Range............................. -60NC to +150NC
Lead Temperature (soldering, 10s) ................................+300NC
Soldering Temperature (reflow).......................................+260NC
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
DC ELECTRICAL CHARACTERISTICS (5V OPERATION)
(Typical Application Circuit, 50I system impedance, tuned for 315MHz to 434MHz operation. VDD5 = VGPOVDD = 4.5V to 5.5V, fRF =
280MHz to 450MHz, fXTAL = 15MHz to 16MHz, TA = -40NC to +125NC, unless otherwise noted. Typical values are at VDD5 = VGPOVDD
= +5V, TA = +25NC, PA matched for optimum output power, unless otherwise noted. All min and max values are 100% tested at TA
= +125NC and guaranteed by design and characterization over temperature, unless otherwise noted.)
PARAMETER
Supply Voltage
Regulated Analog Supply
Voltage
SYMBOL
VDD
AVDD
CONDITIONS
MIN
TYP MAX UNITS
4.5
5
5.5
V
3.2
V
PLL on, PA off
fRF = 315MHz
fRF = 433.92MHz
4.7
6.0
5.3
6.9
PLL on, PA on, data
at 50% duty cycle fRF = 315MHz
12.5
(ASK), +10dBm
(PApwr = 0x19)
output power
fRF = 433.92MHz
14.2
(Notes 1, 2)
Active Supply Current
IDD
PLL on, PA on, data
at 100% duty cycle, fRF = 315MHz
+10dBm (PApwr =
0x19) output power fRF = 433.92MHz
(Note 1)
mA
19
26
25
31.6
Standby Current
DIGITAL I/O
ISTDBY
PLL on, PA on, data
at 100% duty cycle,
max (PApwr = 0x1E)
output power
(Note 1)
VENABLE < VIL,
VLSHDN < VIL
fRF = 315MHz
fRF = 433.92MHz
TA = +25NC
TA = +85NC
TA = +125NC
28
34
1.1
1.3
FA
3.8
6.1
Input High Threshold
VIH
0.9 x
VDVDD
V
Input Low Threshold
VIL
0.1 x
VDVDD
V
2
Maxim Integrated
Share Link: 