mPD78P368A
4.4 PROCEDURE FOR READING FROM PROM
The following is a procedure for reading out the contents of PROM to the external data bus (D0 to D7).
(1) Always set each pin as follows: MODE0/VPP = H and MODE1 = L. Connect unused pins according to PIN
CONFIGURATION (2).
(2) Apply +5 V to the VDD and MODE0/VPP pins.
(3) Input the address of data to be read into the A0 to A16 pins.
(4) Read mode (CE = L, OE = L)
(5) Output the data on the D0 to D7 pins.
Fig. 4-5 is a timing chart of these steps (2) to (5).
Fig. 4-5 PROM Read Timing Chart
A0 - A16
Address input
CE (input)
OE (input)
Hi-Z
D0 - D7
Hi-Z
Data output
21