24IMS6-15-9 查看數據表（PDF） - Power-One Inc.

零件编号

产品描述 (功能)

生产厂家

24IMS6-15-9

6 Watt SMD and through hole DC/DC converters

Power-One Inc. 

Industrial Environment

DC/DC Converters < 40W

IMS6 Series

Description of Options

Table 16: Survey of options

Option

Z

M

K

Function of option

Available in 'open frame' version without case

Surface mount version, SMD

Alternative pinout

Characteristic

Bare board construction without case. Consult factory.

Not available for 5 IMX 4 and 70 IMX 4 types

Not available for 5 IMX 4 and 70 IMX 4 types as well as all types

with 3.3 V or 24 V outputs

Option M

Surface mount version.

Note: Precautions should be taken when reflow soldering

the SMD version, option M. The reflow soldering instruc-

tions below should be strictly adhered to. An inadequate

soldering process may permanently damage the converter

or degrade its performance and Melcher will not honour any

guarantee/warranty claims resulting from damage caused

by ignoring the soldering instructions.

Infrared soldering is not permitted.

The surface mountable version of this product is assem-

bled with high melting point solder (227 C) to ensure that

the solder joints of of the internal components do not de-

grade in the end users SMD soldering process.

This product is only specified for "Forced Convection

Reflow Soldering" (Hot Air). Any conventional soldering

profile is acceptable provided that the restriction curve be-

low is not exceeded at any time during the reflow process.

Tpeak [ C]

240

11051

235

230

225

220

215

210

205

t [s]

0

10

20

30

40

50

Fig. 24

Forced convection reflow soldering restriction curve

measured on pin 2

Option K

Alternative pinout.

This option defines an alternative pinout.

Option K excludes option M and vice versa.

1

24

12

13

2.5

26.6

Fig. 25

Proposed solder lands.

Edition 1 06.00

Share Link: