Philips Semiconductors
Dual 4-channel analog
multiplexer/demultiplexer with latch
Product specification
74HC/HCT4352
Test conditions:
VCC = 4.5 V; GND = 0 V; VEE = −4.5 V;
RL = 50 Ω; Rsource = 1 kΩ.
Fig.13 Typical frequency response.
Fig.14 Test circuit for measuring sine-wave
distortion and minimum frequency response.
Fig.15 Test circuit for measuring switch “OFF” signal
feed-through.
Fig.16 Test circuits for measuring crosstalk between any two switches/multiplexers.
(a) channel ON condition; (b) channel OFF condition.
The crosstalk is defined as
follows (oscilloscope output):
Fig.17 Test circuit for measuring crosstalk between control and any switch.
December 1990
13