ACPL-4800-000E 查看數據表（PDF） - Avago Technologies

零件编号

产品描述 (功能)

生产厂家

ACPL-4800-000E

High CMR Intelligent Power Module and Gate Drive Interface Optocoupler

Avago Technologies 

Insulation and Safety Related Specifications

Parameter

Symbol 8-Pin DIP Unit Conditions

Minimum External Air

Gap(External Clearance)

L(101) 7.1

Minimum External Track- L(102) 7.4

ing (External Creepage)

Minimum Internal Plastic

0.08

Gap (Internal Clearance)

mm Measured from input terminals to output terminals,

shortest distance through air.

mm Measured from input terminals to output terminals,

shortest distance path along body.

Through insulation distance, conductor to conductor,

usually the direct distance between the photo emitter

and photo detector inside the optocoupler cavity.

Minimum Internal Tracking

NA

(Internal Creepage)

Tracking Resistance

CTI

200

(Comparative Tracking

Index)

Isolation Group

IIIa

mm Measured from input terminals to output terminals,

along internal cavity.

mm DIN IEC 112/VDE 0303 Part 1

Material Group (DIN VDE 0110, 1/89, Table 1)

Option 300 - surface mount classification is Class A in accordance with CECC 00802.

IEC/EN/DIN EN 60747-5-2 Insulation Characteristics (Option 060)

Description

Installation classification per DIN VDE 0110/1.89, Table 1

for rated mains voltage ≤ 300 Vrms

for rated mains voltage ≤ 450 Vrms

Climatic Classification

Pollution Degree (DIN VDE 0110/1.89)

Maximum Working Insulation Voltage

Input to Output Test Voltage, Method b*

VIORM x 1.875=VPR,100% Production Test with tm=1 sec, Partial discharge < 5 pC

Input to Output Test Voltage, Method a*

VIORM x 1.5=VPR, Type and Sample Test, tm=60 sec, Partial discharge < 5 pC

Highest Allowable Over-voltage(Transient Over-voltage tini = 10 sec)

Safety-limiting values - maximum values allowed in the event of a failure.

Case Temperature

Input Current

Output Power (refer to Thermal Derating Curve)

Insulation Resistance at TS, VIO = 500 V

Symbol Characteristic

VIORM

VPR

I-IV

I-III

55/85/21

2

630

1181

VPR

945

VIOTM 6000

TS

IS, INPUT

PS, OUT-

PUT

RS

175

230

600

>109

Unit

Vpeak

Vpeak

Vpeak

Vpeak

°C

mA

mW

W

* Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section, (IEC/EN/DIN

EN 60747-5-2) for a detailed description of Method a and Method b partial discharge test profiles.

Note:

Isolation characteristics are guaranteed only within the safety maximum ratings which must be ensured by protective circuits in application.



Share Link: