No.
Parameter
3
The Shape of Dot
(1) Dot Shape (with Dent)
0.15 ≥
Criteria
As per the sketch of left hand.
(2) Dot Shape (with Projection)
Should not be connected to next dot.
(3) Pin Hole
X
(X+Y) / 2 ≤ 0.2mm
(Less than 0.1mm is no counted.)
(4) Deformation
Y
(X+Y) / 2 ≤ 0.2mm
X
Total acceptable number : 1/dot, 5/cell
(Defect number of (4) : 1pc.)
4
Polarizer Scratches Not to be conspicuous defects.
5
Polarizer Dirts
If the stains are removed easily from LCDP surface, the module is not
defective.
6
Complex Foreign
Black spots, line shaped foreign substances or air bubbles between
Substance Defects glass & polarizer should be 5pcs maximum in total.
7
Distance between D ≤ 0.2 : 20mm or more
Different Foreign
0.2 < D : 40mm or more
Substance Defects
DMF5005NF-SEW-BBE-CQ (CQ) No. 2001-0149
OPTREX CORPORATION
Page 14/17