AD822B 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
生产厂家
AD822B Datasheet PDF : 28 Pages
| |||
AD822
ABSOLUTE MAXIMUM RATINGS
Table 5.
Parameter
Rating
Supply Voltage
Internal Power Dissipation1
±18 V
PDIP (N)
SOIC (R)
Input Voltage
Output Short Circuit Duration
Differential Input Voltage
Storage Temperature Range (N)
Observe derating curves
Observe derating curves
(+VS + 0.2 V) to
−(20 V + VS)
Indefinite
±30 V
–65°C to +125°C
Storage Temperature Range (R, RM) –65°C to +150°C
Operating Temperature Range
AD822 A Grade and B Grade
Lead Temperature Range
(Soldering, 60 sec)
–40°C to +85°C
260°C
1 8-lead PDIP package: θJA = 90°C/W.
8-lead SOIC package: θJA = 160°C/W.
8-lead MSOP package: θJA = 190°C/W.
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
MAXIMUM POWER DISSIPATION
The maximum power that can be safely dissipated by the
AD822 is limited by the associated rise in junction temperature.
For plastic packages, the maximum safe junction temperature is
145°C. If these maximums are exceeded momentarily, proper
circuit operation is restored as soon as the die temperature is
reduced. Leaving the device in the overheated condition for an
extended period can result in device burnout. To ensure proper
operation, it is important to observe the derating curves shown
in Figure 27.
While the AD822 is internally short-circuit protected, this may
not be sufficient to guarantee that the maximum junction
temperature is not exceeded under all conditions. With power
supplies ±12 V (or less) at an ambient temperature of 25°C or
less, if the output node is shorted to a supply rail, then the
amplifier is not destroyed, even if this condition persists for an
extended period.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. G | Page 12 of 28
Share Link: 