ADJD-S313-QR999 查看數據表（PDF） - Avago Technologies
零件编号
产品描述 (功能)
生产厂家
ADJD-S313-QR999 Datasheet PDF : 16 Pages
| |||
Recommendations for Handling and Storage of
ADJD-S313
This product is qualified as Moisture Sensitive Level 3
per Jedec J-STD-020. Precautions when handling this
moisture sensitive product is important to ensure the
reliability of the product. Do refer to Avago Application
Note AN5305 Handling Of Moisture Sensitive Surface
Mount Devices for details.
A. Storage before use
• Unopened moisture barrier bag (MBB) can be stored
at 30°C and 90%RH or less for maximum 1 year
• It is not recommended to open the MBB prior to
assembly (e.g. for IQC)
• It should also be sealed with a moisture absorbent
material (Silica Gel) and an indicator card (cobalt
chloride) to indicate the moisture within the bag
B. Control after opening the MBB
• The humidity indicator card (HIC) shall be read
immediately upon opening of MBB
• The components must be kept at <30°C/60%RH at
all time and all high temperature related process
including soldering, curing or rework need to be
completed within 168hrs
C. Control for unfinished reel
• For any unused components, they need to be stored
in sealed MBB with desiccant or desiccator at <5%RH
D. Control of assembled boards
• If the PCB soldered with the components is to be
subjected to other high temperature processes, the
PCB need to be stored in sealed MBB with desiccant
or desiccator at <5%RH to ensure no components
have exceeded their floor life of 168hrs
E. Baking is required if:
Package Tape and Reel Dimensions
Carrier Tape Dimensions
• “10%” or “15%” HIC indicator turns pink
• The components are exposed to condition of >30°C/
60%RH at any time.
• The components floor life exceeded 168hrs
• Recommended baking condition (in component
form): 125°C for 24hrs
4.00 ± 0.10
SEE NOTE #2
2.00 ± 0.05
SEE NOTE #2
B
1.55 ± 0.05
R 0.50 TYP.
1.75 ± 0.10
5.50 ± 0.05
12.00 ± 0.10
Bo
A
A
Ko
SECTION B-B
B
Ao
8.00 ± 0.10
0.30 ± 0.05
SECTION A-A
NOTES:
1. Ao AND Bo MEASURED AT 0.3 mm ABOVE BASE OF POCKET.
2. 10 PITCHES CUMULATIVE TOLERANCE IS ± 0.2 mm.
3. DIMENSIONS ARE IN MILLIMETERS (mm).
1.50 (MIN.)
Ao:
Bo:
Ko:
PITCH:
WIDTH:
5.30
5.30
2.20
8.00
12.00
15
Share Link: 