ADM1032 查看數據表（PDF） - Analog Devices
零件编号
产品描述 (功能)
生产厂家
ADM1032 Datasheet PDF : 12 Pages
| |||
ADM1032
Thermocouple effects should not be a major problem as 1°C
corresponds to about 200 V, and thermocouple voltages are
about 3 V/°C of temperature difference. Unless there are two
thermocouples with a big temperature differential between them,
thermocouple voltages should be much less than 200 V.
5. Place a 0.1 µF bypass capacitor close to the VDD pin. In very
noisy environments place a 2200 pF input filter capacitors
across D+, D– close to the ADM1032.
6. If the distance to the remote sensor is more than 8 inches, the
use of twisted pair cable is recommended. This will work up
to about 6 to 12 feet.
7. For really long distances (up to 100 feet) use shielded twisted
pair such as Belden #8451 microphone cable. Connect the
twisted pair to D+ and D– and the shield to GND close to
the ADM1032. Leave the remote end of the shield unconnected
to avoid ground loops.
Because the measurement technique uses switched current
sources, excessive cable and/or filter capacitance can affect the
measurement. When using long cables, the filter capacitor may
be reduced or removed.
Cable resistance can also introduce errors. 1 Ω series resistance
introduces about 1°C error.
APPLICATION CIRCUIT
Figure 7 shows a typical application circuit for the ADM1032,
using a discrete sensor transistor connected via a shielded,
twisted pair cable. The pull-ups on SCLK, SDATA, and ALERT
are required only if they are not already provided elsewhere
in the system.
The SCLK, and SDATA pins of the ADM1032 can be inter-
faced directly to the SMBus of an I/O controller such as the
Intel 820 chipset.
2N3906 SHIELD
OR
CPU THERMAL
DIODE
0.1F
VDD
ADM1032
D+
SCLK
D–
SDATA
ALERT
THERM
VDD
3V TO 3.6V
TYP 10k⍀
SMBUS
CONTROLLER
5V OR 12V
GND
TYP 10k⍀
FAN ENABLE
FAN CONTROL
CIRCUIT
Figure 7. Typical Application Circuit
8-Lead SO
(R-8)
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
8-Lead Micro_SO
(RM-8)
0.1968 (5.00)
0.1890 (4.80)
8
0.1574 (4.00)
0.1497 (3.80) 1
5
0.2440 (6.20)
4 0.2284 (5.80)
PIN 1
0.0500 (1.27)
BSC
0.0196 (0.50)
0.0099 (0.25) ؋ 45؇
0.0098 (0.25)
0.0040 (0.10)
SEATING
PLANE
0.0688 (1.75)
0.0532 (1.35)
8؇
0.0192 (0.49)
0.0098 (0.25) 0؇
0.0138 (0.35)
0.0075 (0.19)
0.0500 (1.27)
0.0160 (0.41)
0.122 (3.10)
0.114 (2.90)
8
0.122 (3.10)
0.114 (2.90)
1
5
0.199 (5.05)
0.187 (4.75)
4
PIN 1
0.0256 (0.65) BSC
0.120 (3.05)
0.120 (3.05)
0.112 (2.84)
0.112 (2.84)
0.006 (0.15)
0.002 (0.05)
0.043 (1.09)
0.037 (0.94)
6؇
0.015 (0.38)
SEATING 0.009 (0.22)
PLANE
0.009 (0.23) 0؇
0.003 (0.08)
0.028 (0.71)
0.016 (0.41)
–12–
REV. 0
Share Link: 