ATMEGA329 查看數據表（PDF） - Atmel Corporation
零件编号
产品描述 (功能)
生产厂家
ATMEGA329 Datasheet PDF : 392 Pages
| |||
9. System Clock and Clock Options
9.1 Clock Systems and their Distribution
Figure 9-1 presents the principal clock systems in the AVR and their distribution. All of the clocks
need not be active at a given time. In order to reduce power consumption, the clocks to modules
not being used can be halted by using different sleep modes, as described in “Power Manage-
ment and Sleep Modes” on page 35. The clock systems are detailed below.
Figure 9-1. Clock Distribution
LCD Controller
Asynchronous
Timer/Counter
General I/O
Modules
CPU Core
RAM
Flash and
EEPROM
clkI/O
clkASY
AVR Clock
Control Unit
clkCPU
clkFLASH
Reset Logic
Watchdog Timer
Source clock
Clock
Multiplexer
Watchdog clock
Watchdog
Oscillator
9.1.1
9.1.2
9.1.3
Timer/Counter
Oscillator
External Clock
Crystal
Oscillator
Low-frequency
Crystal Oscillator
Calibrated RC
Oscillator
CPU Clock – clkCPU
The CPU clock is routed to parts of the system concerned with operation of the AVR core.
Examples of such modules are the General Purpose Register File, the Status Register and the
data memory holding the Stack Pointer. Halting the CPU clock inhibits the core from performing
general operations and calculations.
I/O Clock – clkI/O
The I/O clock is used by the majority of the I/O modules, like Timer/Counters, SPI, and USART.
The I/O clock is also used by the External Interrupt module, but note that some external inter-
rupts are detected by asynchronous logic, allowing such interrupts to be detected even if the I/O
clock is halted. Also note that start condition detection in the USI module is carried out asynchro-
nously when clkI/O is halted, enabling USI start condition detection in all sleep modes.
Flash Clock – clkFLASH
The Flash clock controls operation of the Flash interface. The Flash clock is usually active simul-
taneously with the CPU clock.
26 ATmega329/3290/649/6490
2552J–AVR–08/07
Share Link: 