MAX690T 查看數據表（PDF） - Maxim Integrated
零件编号
产品描述 (功能)
生产厂家
MAX690T Datasheet PDF : 12 Pages
| |||
3.0V/3.3V Microprocessor Supervisory Circuits
_Ordering Information (continued)
PART**
MAX704_CPA
MAX704_CSA
MAX704_C/D
MAX704_EPA
MAX704_ESA
MAX704_MJA
MAX802_CPA
MAX802_CSA
MAX802_C/D
MAX802_EPA
MAX802_ESA
MAX802_MJA
MAX804_CPA
MAX804_CSA
MAX804_C/D
MAX804_EPA
MAX804_ESA
MAX804_MJA
MAX805_CPA
MAX805_CSA
MAX805_C/D
MAX805_EPA
MAX805_ESA
MAX805_MJA
MAX806_CPA
MAX806_CSA
MAX806_C/D
MAX806_EPA
MAX806_ESA
MAX806_MJA
TEMP RANGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
PIN-PACKAGE
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
8 Plastic DIP
8 SO
Dice*
8 Plastic DIP
8 SO
8 CERDIP
*Contact factory for dice specifications.
**These parts offer a choice of reset threshold voltage. Select
the letter corresponding to the desired nominal reset threshold
voltage (T = 3.075V, S = 2.925V, R = 2.625V) and insert it into
the blank to complete the part number.
Devices in PDIP and SO packages are available in both leaded
and lead-free packaging. Specify lead free by adding the +
symbol at the end of the part number when ordering. Lead free
not available for CERDIP package.
___________________Chip Topography
VOUT VBATT
VCC
GND
0.110"
(2.794mm)
RESET
(RESET)
WDI
[MR]
PFI PFO
0.080"
(2.032mm)
( ) ARE FOR MAX804T/S/R, MAX805T/S/R.
[ ] ARE FOR MAX704T/S/R, MAX806T/S/R.
TRANSISTOR COUNT: 802;
SUBSTRATE IS CONNECTED TO THE HIGHER OF
VCC OR VBATT, AND MUST BE FLOATED IN ANY
HYBRID DESIGN.
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 __________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 (408) 737-7600
© 2005 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products, Inc.
Share Link: 