Audio ICs
BH3874AKS2
When transmitting more than one piece of data at once, we request the following serial control transmission.
(1) Timing of serial data and latch
DATA
8bit
DATA
8bit
DATA
8bit
DATA
8bit
DATA
8bit
DATA
8bit
DATA
8bit
DATA
8bit
DATA
8bit
DATA
8bit
DATA
[1]
[2]
[3]
Cf. (2)
LATCH
α
DATA&LATCH
β
γ
β
γ
β
γ
Fig.3
TIme
Parameter
Time
α Latch width
More than 2.0µs
β
The time which transmits more than one piece of
data at once
Less than 2.5ms
The time which sends more than one piece of the
γ
following data after sending more than one pirce
More than 100ms
of data (When the capacitor of 33 pin is 0.22µF.)
(2) About the order which transmits more than one piece of DATA at once
When transmitting more than one piece of DATA including [1], [2] or [3] at once, transmit DATA of [1], [2] or [3] of the
data format first.
In case of transmitting some data from [1] until [8], transmit only necessary DATA in order from [1].
(3) About DATA needing the timing of (1)
DATA needing the timing of (1) are DATA [1], [2] and [3]. Even if one data of DATA [1], [2] and [3] is transmitted, follow
the timing of (1).
In case of transmitting some data from [4] until [8], the timing of (1) need not be followed. In the case, there are no
problems if the constant of timing chart in the preceding page is satisfied.