DS1721S 查看數據表（PDF） - Dallas Semiconductor -> Maxim Integrated

零件编号

产品描述 (功能)

生产厂家

DS1721S

2-Wire Digital Thermometer and Thermostat

Dallas Semiconductor -> Maxim Integrated 

NOTES:

1. All voltages are referenced to ground.

DS1721

2. I/O pins of fast mode devices must not obstruct the SDA and SCL lines if VDD is switched off.

3. IDD specified with TOUT pin open.

4. IDD specified with VDD at 5.0V and SDA,SCL = 5.0V, 0°C to 70°C.

5. See typical accuracy curves for specification limits outside the temperature range indicated.

6. After this period, the first clock pulse is generated.

7. The maximum tHD:DAT has only to be met if the device does not stretch the LOW period (tLOW) of the

SCL signal.

8. A fast mode device can be used in a standard mode system, but the requirement tSU:DAT >250 ns must

then be met. This will automatically be the case if the device does not stretch the LOW period of the

SCL signal. If such a device does stretch the LOW period of the SCL signal, it must output the next

data bit to the SDA line tR MAX+tSU:DAT 1000+250 = 1250 ns before the SCL line is released.

9. Cb - total capacitance of one bus line in pF.

TIMING DIAGRAMS Figure 7

TYPICAL DS1721 THERMOMETER PERFORMANCE CURVE Figure 8

TBD

16 of 16

Share Link: