HCPL-0723-500E 查看數據表（PDF） - Avago Technologies

零件编号

产品描述 (功能)

生产厂家

HCPL-0723-500E

50 MBd 2 ns PWD High Speed CMOS Optocoupler

Avago Technologies 

All Avago data sheets report the creepage and clearance

inherent to the optocoupler component itself. These

dimensions are needed as a starting point for the

equipment designer when determining the circuit insula-

tion requirements. However, once mounted on a printed

circuit board, minimum creepage and clearance require-

ments must be met as specified for individual equipment

standards. For creepage, the shortest distance path along

the surface of a printed circuit board between the solder

fillets of the input and output leads must be considered.

There are recommended techniques such as grooves

and ribs, which may be used on a printed circuit board

to achieve desired creepage and clearances. Creepage

and clearance distances will also change depending

on factors such as pollution degree and insulation

level.

IEC/EN/DIN EN 60747-5-5 Insulation Characteristics (Option 060)

Characteristic

Description

Symbol HCPL-7723 HCPL-0723 Unit

Installation classification per DIN VDE 0110, Table 1

for rated mains voltage ≤ 150 Vrms

for rated mains voltage ≤ 300 Vrms

for rated mains voltage ≤ 600 Vrms

Climatic Classification

I – IV

I – III

I – IV

55/85/21

I – IV

I – III

I – III

55/85/21

Pollution Degree (DIN VDE 0110/39)

2

2

Maximum Working Insulation Voltage

Input to Output Test Voltage, Method b*

VIORM

630

567

Vpeak

VIORM x 1.875 = VPR, 100% Production Test with tm=1 sec,

Partial discharge < 5 pC

VPR

1181

1063

Vpeak

Input to Output Test Voltage, Method a*

VIORM x 1.6 = VPR, Type and Sample Test, tm=10 sec, Partial discharge < 5 pC

Highest Allowable Overvoltage (Transient Overvoltage tini = 60 sec)

Safety-limiting values – maximum values allowed in the event of a failure

Case Temperature

Input Current

Output Power

Insulation Resistance at TS, VIO = 500 V

VPR

VIOTM

1008

8000

TS

IS, INPUT

PS, OUTPUT

RS

175

230

600

≥ 109

907

6000

150

150

600

≥ 109

Vpeak

Vpeak

°C

mA

mW

Ω

*Refer to the optocoupler section of the Isolation and Control Component Designer’s Catalog, under Product Safety Regulations section IEC/EN/

DIN EN 60747-5-5, for a detailed description of Method a and Method b partial discharge test profiles.

6

Share Link: