KB2512 查看數據表（PDF） - Samsung

零件编号

产品描述 (功能)

生产厂家

KB2512

DEFLECTION PROCESSOR FOR MULTISYNC MONITORS

Samsung 

DEFLECTION PROCESSOR FOR MULTISYNC MONITORS

KB2512

NOTES:

1. Duty cycle is the ratio of power transistor off time period. Power transistor is off when output transistor is off.

2. Initial condition for safe operation start up.

3. S and C correction are inhibited so the output sawtooth has a linear shape.

4. With register 07 at byte x0xxxxxx (s-correction is inhibited) then the S correction is inhibited, and with register 08 at byte

x0xxxxxx (C-Correction is inhibited) consequently the sawtooth has a linear shape.

5. These parameters are not tested on each unit. They are measured during our internal qualification.

6. The external power transistor is OFF during 400ns.

7. These parameters are not tested on each unit. They are measured during out internal qualification.

8. Refers to notes 4.

9. TH is the Horizontal period.

10. These parameters are not tested on each unit. They are measured during our internal qualification procedure which

includes characterization on batches coming from corners of our processes and also temperature characterization.

11. See Figure 7 for explanation of reference phase.

12. See Figure 11.

13. This is the frequency range for which the vertical oscillator will automatically synchronize, using a single capacitor value on

Pin 22 and with a constant ramp amplitude.

14. TV is the vertical period.

15. When not used the DC breathing control pin must be connected to 12V.

CAUTIONS:

The ICS near CDT can be latched up by EHT. Therefore, in order to minimize the impact of the EHT, it is necessary to place

ICs far from CDT.

16

Share Link: