LC86P4164
Oscillation type
Manufacturer
Oscillator
C1
C2
12 MHz ceramic resonator
Murata
CSA12.0MTZ
33 pF
33 pF
oscillation
CST12.0MTW
on chip
Kyocera
KBR-12.0M
47 pF
* Both C1 and C2 must use an K rank (±10%) and an SL characteristics.
Table 1. Ceramic Resonator Oscillation Guaranteed Constant (main-clock)
47 pF
Oscillation type
L
C3
14.11 MHz LC oscillation
5.6 µH
27 pF
4.7 µH ± 10%
(Variable)
27 pH
* See Figure 11,12.
Table 2. LC Oscillation Guaranteed Constant (OSD clock)
C4
30 pF (Trimmer)
27 pH
(Notes)
• Since the circuit pattern affects the oscillation frequency, place the oscillation-related parts as close to
the oscillation pins as possible with the shortest possible pattern length.
• If you use other oscillators than those shown above, we provide no guarantee for the characteristics.
• Adjust the voltage of monitor point in Figure 10 to 1/2VDD ± 10% by the LC oscillation constant 'L' or 'C' to lock
the PLL circuit.
CF1
CF2
LC1
LC2
LC1
LC2
C1
CF
C2
Main clock
Figure 1 Ceramic Resonator Oscillation
C3
L
C4
C3
L
C4
OSD clock
Figure 2 LC Resonator Oscillation
No. 5550-15/20