M470L3224BTO 查看數據表（PDF） - Samsung
零件编号
产品描述 (功能)
生产厂家
M470L3224BTO Datasheet PDF : 14 Pages
| |||
M470L3224BT0
200pin DDR SDRAM SODIMM
6. Input Setup/Hold Slew Rate Derating
Input Setup/Hold Slew Rate
∆tIS
∆tIH
(V/ns)
(ps)
(ps)
0.5
0
0
0.4
+50
+50
0.3
+100
+100
This derating table is used to increase tIS/tIH in the case where the input slew rate is below 0.5V/ns. Input setup/hold slew rate
based on the lesser of AC-AC slew rate and DC-DC slew rate.
7. I/O Setup/Hold Slew Rate Derating
I/O Setup/Hold Slew Rate
∆tDS
∆tDH
(V/ns)
(ps)
(ps)
0.5
0
0
0.4
+75
+75
0.3
+150
+150
This derating table is used to increase tDS/tDH in the case where the I/O slew rate is below 0.5V/ns. I/O setup/hold slew rate
based on the lesser of AC-AC slew rate and DC-DC slew rate.
8. I/O Setup/Hold Plateau Derating
I/O Input Level
∆tDS
∆tDH
(mV)
(ps)
(ps)
± 280
+50
+50
This derating table is used to increase tDS/tDH in the case where the input level is flat below VREF ± 310mV for a duration of
up to 2ns.
9. I/O Delta Rise/Fall Rate(1/slew-rate) Derating
Delta Rise/Fall Rate
∆tDS
∆tDH
(ns/V)
(ps)
(ps)
0
0
0
±0.25
+50
+50
±0.5
+100
+100
This derating table is used to increase tDS/tDH in the case where the DQ and DQS slew rates differ. The Delta Rise/Fall Rate
is calated as 1/SlewRate1-1/SlewRate2. For example, if slew rate 1 = 5V/ns and slew rate 2 =.4V/ns then the Delta Rise/Fall
Rate =-0/5ns/V. Input S/H slew rate based on larger of AC-AC delta rise/fall rate and DC-DC delta rise/fall rate.
10. This parameter is fir system simulation purpose. It is guranteed by design.
Rev. 0.1 June. 2001
Share Link: 