MAAP-000072-MCH000 查看數據表（PDF） - Tyco Electronics
零件编号
产品描述 (功能)
生产厂家
MAAP-000072-MCH000 Datasheet PDF : 8 Pages
| |||
Amplifier, Power, 1 W
17.7-19.7 GHz
Assembly and Bonding Diagram
MAAPGM0072-DIE
Rev B
Preliminary Datasheet
Figure 24. Recommended operational configuration. Wire bond as shown.
Die Handling:
Refer to Application Note AN3016.
Assembly Instructions:
Die Attach: Use AuSn (80/20) 1 mil. preform solder. Limit time @ 310 °C to less than
7 minutes. Refer to Application Note AN3017 for more detailed information.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge
bond techniques. For DC pad connections, use either ball or wedge bonds. For best
RF performance, use wedge bonds of shortest length, although ball bonds are also
acceptable.
Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent
damage to amplifier.
8
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Share Link: 