LC75811E 查看數據表（PDF） - SANYO -> Panasonic
零件编号
产品描述 (功能)
生产厂家
LC75811E Datasheet PDF : 27 Pages
| |||
LC75811E, 75811W
SC: Controls the common and segment output pins.
SC
Common and segment output pin states
0 Output of LCD drive waveforms
1
Fixed at the VSS level (all segments off)
Note: *12. When SC is 1, the S1 to S60 and COM1 to COM10 output pins are set to the VSS level, regardless of the M, A, and DG1 to DG12 data.
BU: Controls the normal mode and power saving mode.
BU
Mode
0 Normal mode
Power saving mode
1
(In this mode, the OSCI and OSCO pins oscillator is stopped, and the common and segment pins are set to the VSS level. In this mode,
instructions other than the “display on/off control” instruction cannot be executed. Thus applications must set the LSI to normal mode before
executing any of the other instructions.)
• Display shift ... <Shifts the display>
Code
D56 D57 D58 D59 D60 D61 D62 D63
M A R/L X 0 0 1 1
X: don’t care
M, A: Specifies the data to be shifted
MA
Shift operating state
0
0 Neither MDATA nor ADATA is shifted
0
1 Only ADATA is shifted
1
0 Only MDATA is shifted
1
1 Both MDATA and ADATA are shifted
R/L: Shift direction specification
R/L
Shift direction
0
Left shift
1
Right shift
• Set AC address... <Specifies the DCRAM and ADRAM address for AC>
Code
D48 D49 D50 D51 D52 D53 D54 D55 D56 D57 D58 D59 D60 D61 D62 D63
DA0 DA1 DA2 DA3 DA4 DA5 X X RA0 RA1 RA2 RA3 0 1 0 0
X: don’t care
DA0 to DA5: DCRAM address
DA0
DA1
DA2
DA3
LSB
Least significant bit
DA4
DA5
MSB
Most significant bit
RA0 to RA3: ADRAM address
RA0
RA1
LSB
Least significant bit
RA2
RA3
MSB
Most significant bit
This instruction loads the 6-bit DCRAM address DA0 to DA5 and the 4-bit ADRAM address RA0 to RA3 into the AC.
No. 5915-12/27
Share Link: 