MAX9317 查看數據表（PDF） - Maxim Integrated

零件编号

产品描述 (功能)

生产厂家

MAX9317

Dual 1:5 Differential Clock Drivers with LVPECL Inputs and LVDS Outputs

Maxim Integrated 

Dual 1:5 Differential Clock Drivers with LVPECL

Inputs and LVDS Outputs

AC ELECTRICAL CHARACTERISTICS (continued)

(VCC = 2.375V to 2.625V (MAX9317/MAX9317A) or VCC = 3.0V to 3.6V (MAX9317B/MAX9317C), all outputs loaded with 100Ω ±1%,

between Q_ and Q_, fIN ≤ 1.0GHz, input transition time = 125ps (20% to 80%), VIHD - VILD = 0.15V to VCC, unless otherwise noted.

Typical values are at VCC = 2.5V (MAX9317/MAX9317A), VCC = 3.3V (MAX9317B/MAX9317C), fIN = 1.0GHz, VIHD = VCC - 1.0V,

VILD = VCC - 1.5V, unless otherwise noted.) (Notes 1 and 4)

PARAMETER SYMBOL

CONDITIONS

-40°C

+25°C

+85°C

UNITS

MIN TYP MAX MIN TYP MAX MIN TYP MAX

Differential

Output Rise/Fall

Time

tR/tF

20% to 80%, Figure 1 140 200 300 140 205 300 140 205 300 ps

Note 1: Measurements are made with the device in thermal equilibrium.

Note 2: Current into a pin is defined as positive. Current out of a pin is defined as negative.

Note 3: DC parameters are production tested at +25°C. DC limits are guaranteed by design and characterization over the full oper-

ating temperature range.

Note 4: Guaranteed by design and characterization, and are not production tested. Limits are set to ±6 sigma.

Note 5: All outputs loaded with 100Ω differential, all inputs biased differential high or low except VT_.

Note 6: Measured between outputs of the same device at the signal crossing points for a same-edge transition.

Note 7: Measured between outputs on different devices for identical transitions and VCC levels.

Note 8: Device jitter added to the input signal.

Typical Operating Characteristics

(MAX9317, VCC = 2.5V, all outputs loaded with 100Ω ±1%, between Q_ and Q_, fIN = 1.0GHz, input transition time = 125ps (20% to

80%), VIHD = VCC - 1.0V, VILD = VCC - 1.5V, unless otherwise noted.)

SUPPLY CURRENT vs. TEMPERATURE

OUTPUT AMPLITUDE (VOH - VOL)

vs. CLK_ FREQUENCY

OUTPUT RISE/FALL TIME

vs. TEMPERATURE

90

400

230

INPUTS OPEN, OUTPUTS TERMINATED

WITH 100Ω DIFFERENTIAL

85

220

300

FALL TIME

80

210

200

75

200

RISE TIME

100

70

190

65

-40 -15 10

35

60

85

TEMPERATURE (°C)

0

0

0.5

1.0

1.5

2.0

CLK_ FREQUENCY (GHz)

180

-40 -15

10

35

60

85

TEMPERATURE (°C)

CLK-TO-Q PROPAGATION DELAY

vs. TEMPERATURE

340

CLK-TO-Q PROPAGATION DELAY vs. HIGH

VOLTAGE OF DIFFERENTIAL INPUT (VIHD)

324.0

335

330

325

tPLH

320

315

tPHL

323.5

323.0

tPHL

tPLH

322.5

310

-40 -15 10

35

60

85

322.0

1.2

1.5

1.8

2.1

2.4

4 ___________________________T_EM_P_E_RA_T_U_RE_(_°C_)______________________H_IG_H_V_O_L_TA_G_E_O_F _DI_FF_E_RE_N_TI_A_L I_N_PU_T_(_V)_____

Share Link: