Version History
Rev 14.0
Rev. 15
Rev. 16
Document Revision History (Continued)
Description of Change
Replaced “Tri-stated” with an explanation in State During Reset column in Table 2-2.
Added the following note to the description of the TMS signal in Table 2-2:
Note: Always tie the TMS pin to VDD through a 2.2K resistor.
Changed the “Frequency Accuracy” specification in Table 10-16 (was ±2.0%, is +2 / -3%).
Please see http://www.freescale.com for the most current data sheet revision.
56F8322 Technical Data, Rev. 16
Freescale Semiconductor
3
Preliminary