DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MCF5213CAF66 查看數據表(PDF) - Freescale Semiconductor

零件编号
产品描述 (功能)
生产厂家
MCF5213CAF66
Freescale
Freescale Semiconductor Freescale
MCF5213CAF66 Datasheet PDF : 56 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
Table 3. Pin Functions by Primary and Alternate Purpose (continued)
Pin
Group
Primary
Function
Secondary
Function
Tertiary
Function
Quaternary
Function
Drive
Strength /
Control1
Slew Rate /
Control1
Pull-up /
Pull-down2
Pin on
100 LQFP
Pin on 81 Pin on 64
MAPBGA LQFP/QFN
UART 1
UCTS1
SYNCA
URXD2
GPIO PDSR[15] PSRR[15]
98
C3
61
URTS1
SYNCB
UTXD2
GPIO PDSR[14] PSRR[14]
4
B1
2
URXD1
GPIO PDSR[13] PSRR[13]
100
B2
63
UTXD1
GPIO PDSR[12] PSRR[12]
99
A2
62
UART 2
UCTS2
GPIO PDSR[27] PSRR[27]
27
URTS2
GPIO PDSR[26] PSRR[26]
30
URXD2
GPIO PDSR[25] PSRR[25]
28
UTXD2
FlexCAN CANRX4,11
CANTX4,11
GPIO PDSR[24] PSRR[24]
29
N/A
N/A
N/A
N/A
VSTBY
VSTBY
N/A
N/A
55
F8
37
VDD
VDD
N/A
N/A
1,2,14,22, D5,E3–E7, 1,10,20,39,5
23,34,41,
F5
2
57,68,81,93
VSS
VSS
N/A
N/A
3,15,24,25,3 A1,A9,D4,D 11,21,38,
5,42,56, 6,F4,F6,J1 53,64
67,75,82,92
1 The PDSR and PSSR registers are described in the General Purpose I/O chapter. All programmable signals default to 2 mA drive and FAST slew rate in
normal (single-chip) mode.
2 All signals have a pull-up in GPIO mode.
3 These signals are multiplexed on other pins.
4 The multiplexed CANTX and CANRX signals are not available on the MCF5211 or MCF5212.
5 For primary and GPIO functions only.
6 Only when JTAG mode is enabled.
7 CLKMOD0 and CLKMOD1 have internal pull-down resistors; however, the use of external resistors is very strongly recommended.
8 For secondary and GPIO functions only.
9 RSTI has an internal pull-up resistor; however, the use of an external resistor is very strongly recommended.
10 For GPIO function. Primary Function has pull-up control within the GPT module.
11 CANTX and CANRX are secondary functions only.

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]