MCF52110 Family Configurations
1.2.21 Reset
The reset controller determines the source of reset, asserts the appropriate reset signals to the system, and keeps track of what
caused the last reset. There are seven sources of reset:
• External reset input
• Power-on reset (POR)
• Watchdog timer
• Phase locked-loop (PLL) loss of lock / loss of clock
• Software
• Low-voltage detector (LVD)
• JTAG
Control of the LVD and its associated reset and interrupt are managed by the reset controller. Other registers provide status flags
indicating the last source of reset and a control bit for software assertion of the RSTO pin.
1.2.22 GPIO
Nearly all pins on the MCF52110 have general purpose I/O capability and are grouped into 8-bit ports. Some ports do not use
all eight bits. Each port has registers that configure, monitor, and control the port pins.
1.2.23 Part Numbers and Packaging
This product is RoHS-compliant. Refer to the product page at freescale.com or contact your sales office for up-to-date RoHS
information.
Table 2. Part Number Summary
Part Number
MCF52100
MCF52110
Flash / SRAM
64 Kbytes / 16 Kbytes
128 Kbytes / 16 Kbytes
Key Features
2 UARTs, 2 I2C, QSPI, A/D, DMA,
16-/32-bit/PWM Timers
3 UARTs, 2 I2C, QSPI, A/D, DMA,
16-/32-bit/PWM Timers
Package
64 LQFP/QFN
81 MAPBGA
64 LQFP/QFN
81 MAPBGA
100 LQFP
Speed
66, 80 MHz
66, 80 MHz
MCF52110 ColdFire Microcontroller, Rev. 0
12
Freescale Semiconductor