MCP23008 查看數據表（PDF） - Microchip Technology

零件编号

产品描述 (功能)

生产厂家

MCP23008

8-Bit I/O Expander with Serial Interface

Microchip Technology 

MCP23008/MCP23S08

1.6.8

INTERRUPT FLAG (INTF)

REGISTER

The INTF register reflects the interrupt condition on the

port pins of any pin that is enabled for interrupts via the

GPINTEN register. A ‘set’ bit indicates that the

associated pin caused the interrupt.

This register is ‘read-only’. Writes to this register will be

ignored.

Note:

INTF will always reflect the pin(s) that

have an interrupt condition. For example,

one pin causes an interrupt to occur and is

captured in INTCAP and INF. If before

clearing the interrupt another pin changes,

which would normally cause an interrupt, it

will be reflected in INTF, but not INTCAP.

REGISTER 1-8: INTF – INTERRUPT FLAG REGISTER (ADDR 0x07)

R-0

INT7

bit 7

R-0

INT6

R-0

INT5

R-0

INT4

R-0

INT3

R-0

INT2

R-0

INT1

R-0

INT0

bit 0

Legend:

R = Readable bit

-n = Value at POR

W = Writable bit

‘1’ = Bit is set

U = Unimplemented bit, read as ‘0’

‘0’ = Bit is cleared

x = Bit is unknown

bit 7-0

INT7:INT0: These bits reflect the interrupt condition on the port. Will reflect the change only if interrupts

are enabled (GPINTEN) <7:0>.

1 = Pin caused interrupt.

0 = Interrupt not pending.

© 2007 Microchip Technology Inc.

DS21919D-page 17

Share Link: