NJW1165
d) TONE CONTROL TREBLE SETTING
Select
BIT
Address
D7
D6
D5
D4
D3
03H
BCT
TREB
D2
BCST
D1
D0
SUB-TREB
•BCT: Boost cut select for Treble control
“0”: Cut
“1”: Boost
•TREB: Treble control (1dB/step)
Cut Level
: -15dB to 0dB(1dB/Step)
Boost Level
: 0dB to +15dB(1dB/Step)
•BCST: Boost cut select for Sub-Treble control
“0”: Cut
“1”: Boost
•SUB-TREB: Sub-Treble control (1dB/step)
Sub-Cut Level
: -3dB to 0dB(1dB/Step)
Sub-Boost Level : 0dB to +3dB(1dB/Step)
e) OUTPUT AND AUXILIARY SETTING
Select
Address
D7
D6
D5
05H
OUT
Don’t Care Don’t Care
BIT
D4
D3
SUR0
AGC1
D2
AGC0
D1
AUX1
D0
AUX0
•OUT: ON/OFF Switch for OUTPUT
“0” : OFF
“1” : ON
NOTE) The click noise may be generated by changing the “OUT” switch.
Provide the external circuit for avoiding the click noise on above condition.
•Surround Setting
Surround Function
Surround OFF
Surround Effect1
Surround Effect2
Simulated Stereo
SUR0(05H:D4)
0
0
1
1
SUR(01H:D0),
0
1
1
0
Remarks
Input through
Surround Effect Small ( 8.0dB typ. )
Surround Effect Large (12.7dB typ. )
For monaural signal input only
NOTE) The click noise may be generated by changing the Surround mode setting.
Provide the external circuit for avoiding the click noise on above condition.
•AGC Level Setting
AGC Level
AGC1(D3)
150mVrms
0
300mVrms
0
400mVrms
1
540mVrms
1
•AUX1/AUX0: Auxiliary port High/Low
“0”: Logic output ”Low”
“1”: Logic output ”High”
AGC0(D2)
0
1
0
1
- 15 -