OPB802L 查看數據表（PDF） - TT Electronics.
零件编号
产品描述 (功能)
生产厂家
OPB802L Datasheet PDF : 5 Pages
| |||
Wide Gap Slotted Optical
Switch
OPB800 (L and W Series)
Features:
0.375” (9.525 mm) wide gap
Choice of aperture size
Choice of minimum photocurrent
Choice of opaque or IR transmissive shells
Available for PCBoard mounting or with 24” 26 AWG wires
W Package
L Package
Description:
The OPB800L series, PCBoard mounting, of wide gap switch provides the flexibility of a custom device from a standard
product line, while the OPB800W series, remote mounted, switch offers 24” (610 mm) 26 AWG wire interconnect.
Building from a standard housing that utilizes a 0.375” (9.5 mm) wide slot, a user can specify the electrical output
parameters, discrete shell material and the aperture width.
Housings are made from an opaque grade of injection-molded plastic that minimizes the assembly’s sensitivity to visible and
near-infrared ambient radiation. Discrete shells, which are exposed on parallel faces inside the device throat, are made of
IR transmissive plastic (for applications where aperture contamination may occur) or of opaque plastic with aperture
openings (for maximum protection against ambient light).
Applications:
Non-contact interruptive object sensing
Assembly line automation
Machine automation
Equipment security
Machine safety
Optek Assembly
Phototransistor Output Family
Part Number Guide
OPB 8 X X X X X Z
For “W” series only
Sensor Aperture:
1 — 0.010” (.254 mm)
5 — 0.050” (1.270 mm)
Emitter Aperture:
5 — 0.050” (1.270 mm)
Discrete Shell Material:
0 — Transmissive plastic
Discrete shell
1 — Opaque plastic
Discrete shell
Electrical Specification Variations:
0 = Electrical Parameter A
1 = Electrical Parameter B
2 = Electrical Parameter C
Note: Assemblies with 0.010” apertures are
currently available with electrical
parameter “A” only.
Wires = 26AWG—24” Long
Mounting configurations:
L — Solder lead termination
W — Wire termination
General Note
TT Electronics reserves the right to make changes in product specification without
notice or liability. All information is subject to TT Electronics’ own data and is
considered accurate at time of going to print.
© TT electronics plc
TT Electronics | Optek Technology, Inc.
1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200
www.ttelectronics.com | sensors@ttelectronics.com
Issue B 11/2016 Page 1
Share Link: 