RN5RT
TYPICAL APPLICATION
VIN C1
2 VDD
VOUT 3
IOUT
5 CE
C2
GND
1
In the RN5RT Series, a constant voltage can be obtained without using capacitor C1 and C2. However, when the
wire connected to VIN is long, use a capacitor C1. Transient noise of output voltage occurred due to load deviation
can be reduced by using a capacitor C2.
Insert capacitors C1 and C2 with the capacitance of 0.1µF to 2.0µF between input/output pins and GND pin with
minimum wiring.
14