S6B0724 PRELIMINARY SPEC. VER. 1.1
132 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD
Name
E_RDB
DB0
to
DB7
TEST1
to
TEST3
Table 6. Microprocessor Interface Pins Description (Continued)
I/O
Description
Read / Write execution control pin
C68 MPU Type E_RDB
Description
Read / Write control input pin
− RW = "H": When E is "H", DB0 to DB7 are in an
H 6800-series
E
output status.
I
− RW = "L": The data on DB0 to DB7 are latched at
the falling edge of the E signal.
Read enable clock input pin
L
8080-series
/RDB When /RDB is "L", DB0 to DB7 are in an output
status.
8-bit bi-directional data bus that is connected to the standard 8-bit microprocessor data
bus. When the serial interface selected (PS = "L");
I/O
− DB0 to DB5: high impedance
− DB6: serial input clock (SCLK)
− DB7: serial input data (SID)
When chip select is not active, DB0 to DB7 may be high impedance.
I/O
These are pins for IC chip testing.
They are set to Open.
13