SIL30 查看數據表（PDF） - Artesyn Technologies
零件编号
产品描述 (功能)
生产厂家
SIL30 Datasheet PDF : 3 Pages
| |||
SIL30 Series
Single output
DC/DC CONVERTERS 30A Non-Isolated DC/DC Converters
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
NEW Product
OUTPUT
POWER
(MAX.)
INPUT
VOLTAGE
150W 10.2-13.8VDC
OVP
N/A
OUTPUT
VOLTAGE
2.5V
OUTPUT
CURRENT
(MIN.)
0A
OUTPUT
CURRENT
(MAX.)
30A
EFFICIENCY
(TYP.)
91%
REGULATION
LINE LOAD
±0.2% ±1.0%
MODEL
NUMBER (10)
SIL30-12SADJ-V
Notes
1 Uses external resistor from TRIM to output ground. Minimum value
1.9kΩ. See Application Note 132 for details.
2 Measured with external filter. See Application Note 132 for details.
3 di/dt = 10A/µs, Vin = Nom, Tc = 25°C, load change = 0.5 lo max tp 0.75
lo max and 0.75 lo max to 0.5 lo max.
4 External input fusing is recommended.
5 Power up is the time from application of DC input to POWER GOOD high.
Remote ON/OFF asserted high to POWER GOOD high.
6 Signal line assumed <3m.
7 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
8 See Application Note 132 for operation above 50ºC.
9 See Application Note 132 for ripple current requirements.
10 The standard unit with the suffix '-V' is for vertical mounting. To order a
unit with horizontal mounting, please add the suffix '-H' to the model
number, e.g. SIL30-12SADJ-H.
PROTECTION
Short-circuit protection
Over-temperature protection
Foldback, non-latching
Hiccup, non-latching
RECOMMENDED SYSTEM CAPACITANCE
Input capacitance (See Note 9)
Output capacitance (See Note 9)
270µF/20mΩ esr max.
2 x 680µF/10mΩ esr max.
CAUTION: High internal temperatures. Ensure that unit is not user
accessible.
PIN NO.
1
2
3
4
5
6
7
8
9
10
11
12
PIN CONNECTIONS
FUNCTION
PIN NO.
TRIM
13
No Pin
14
Ground
15
Power Good
16
Not Connected
17
Current Share
18
Ground
19
Ground
20
Remote ON/OFF
21
Remote sense (GND) 22
Remote sense (O/P)
23
Vin
24
FUNCTION
Vin
Vin
Vout
Vout
Ground
Vout
Ground
Vout
Ground
Vout
Ground
Vout
International Safety Standard Approvals (pending)
TÜV
Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet
www.artesyn.com
File Name: SIL30.PDF Rev: 19 Sept 2002
Share Link: 