Philips Semiconductors
GreenChipTMII SMPS control IC
Product specification
TEA1533T; TEA1533AT
CHARACTERISTICS
Tamb = 25 °C; VCC = 15 V; all voltages are measured with respect to ground; currents are positive when flowing into
the IC; unless otherwise specified.
SYMBOL
PARAMETER
CONDITIONS
MIN. TYP. MAX. UNIT
Start-up current source (pin DRAIN)
IDRAIN
BVDSS
M-level
supply current drawn from
pin DRAIN
breakdown voltage
mains-dependent operation
enabling level
VCC = 0 V; VDRAIN > 100 V 1.0 1.2
with auxiliary supply;
VDRAIN > 100 V
−
100
650 −
60
−
Supply voltage management (pin VCC)
VCC(start)
VCC(UVLO)
VCC(hys)
ICC(h)
ICC(l)
ICC(restart)
ICC(oper)
start-up voltage on VCC
under voltage lock-out on VCC
hysteresis voltage on VCC
pin VCC charging current, high
pin VCC charging current, low
pin VCC restart current
supply current under normal
operation
10.3
8.1
VCC(start) − VCC(UVLO)
VDRAIN > 100 V; VCC < 3V
VDRAIN > 100 V;
3 V < VCC < VCC(UVLO)
VDRAIN > 100 V;
VCC(UVLO) < VCC < VCC(start)
no load on pin DRIVER
2.0
−1.2
−1.2
−650
1.1
11
8.7
2.3
−1
−0.75
−550
1.3
ICC(burstmode) supply current while not switching
−
0.85
Demagnetization management (pin DEM)
Vth(DEM)
demagnetization comparator
threshold voltage on pin DEM
Iprot(DEM)
protection current on pin DEM
Vclamp(DEM)(neg) negative clamp voltage on
pin DEM
VDEM = 50 mV
IDEM = −150 µA
50 100
−50(1) −
−0.5 −0.25
Vclamp(DEM)(pos) positive clamp voltage on
pin DEM
IDEM = 250 µA
0.5 0.7
tsuppr
suppression of transformer
ringing at start of secondary
stroke
1.1 1.5
1.4 mA
300 µA
−
V
100 V
11.7 V
9.3 V
2.6 V
−0.8 mA
−0.45 mA
−450 µA
1.5 mA
−
mA
150 mV
−10 nA
−0.05 V
0.9 V
1.9 µs
Pulse width modulator
ton(min)
ton(max)
minimum on-time
maximum on-time
Oscillator
fosc(l)
fosc(h)
Vvco(start)
oscillator low fixed frequency
oscillator high fixed frequency
peak voltage on pin Isense, where
frequency reduction starts
latched
VCTRL > 1.5 V
VCTRL < 1 V
see Figs 6 and 7
−
tleb
40 50
20 25
145 175
−
VCO1
−
ns
60
µs
30
kHz
205 kHz
−
mV
2002 Aug 23
13