UAA2082 查看數據表（PDF） - Philips Electronics
零件编号
产品描述 (功能)
生产厂家
UAA2082 Datasheet PDF : 40 Pages
| |||
Philips Semiconductors
Advanced pager receiver
Product specification
UAA2082
FEATURES
• Wide frequency range: VHF, UHF and 900 MHz bands
• High sensitivity
• High dynamic range
• Electronically adjustable filters on chip
• Suitable for data rates up to 2400 bits/s
• Wide frequency offset and deviation range
• Fully POCSAG compatible FSK receiver
• Power on/off mode selectable by the chip enable input
• Low supply voltage; low power consumption
• 1-cell battery-low detection circuit
• High integration level
• Interfaces directly to the PCA5000A, PCF5001 and
PCD5003 POCSAG decoders.
APPLICATIONS
• Wide area paging
• On-site paging
• Telemetry
• RF security systems
• Low bit-rate wireless data links.
GENERAL DESCRIPTION
The UAA2082 is a high-performance low-power radio
receiver circuit primarily intended for VHF, UHF and
900 MHz pager receivers for wide area digital paging
systems, employing direct FM non-return-to-zero (NRZ)
frequency shift keying (FSK).
The receiver design is based on the direct conversion
principle where the input signal is mixed directly down to
the baseband by a local oscillator on the signal frequency.
Two complete signal paths with signals of 90° phase
difference are required to demodulate the signal.
All channel selectivity is provided by the built-in IF filters.
The circuit makes extensive use of on-chip capacitors to
minimize the number of external components.
The battery monitoring circuit has an external sense input
and a 1.1 V detection threshold for easy operation in a
single-cell supply concept.
The UAA2082 was designed to operate together with the
PCA5000A, PCF5001 or PCD5003 POCSAG decoders,
which contain a digital input filter for optimum call success
rate.
ORDERING INFORMATION
TYPE
NUMBER
UAA2082H
UAA2082U
NAME
LQFP32
28 pads
PACKAGE
DESCRIPTION
plastic low profile quad flat package; 32 leads; body 7 × 7 × 1.4 mm
naked die; see Fig.8
VERSION
SOT358-1
1996 Jan 15
2
Share Link: 