µPD78P4038Y
Table 4-1. Types of I/O Circuits for Pins and Handling of Unused Pins (2/2)
Pin
RESET
TEST
AVREF1-AVREF3
AVSS
AVDD
I/O Circuit Type
2
1-A
–
I/O
Input
Recommended Connection Method for Unused Pins
–
To be connected to VSS0 directly
To be connected to VSS0
To be connected to VDD0
Caution When the I/O mode of an I/O alternate-function pin is unpredictable, connect the pin to VDD0
through a resistor of 10 to 100 kilohms (particularly when the voltage of the reset input pin
becomes higher than that of the low level input at power-on or when I/O is switched by software).
Remark Since type numbers are consistent in the 78K Series, those numbers are not always serial in each
product. (Some circuits are not included.)
18