VN5050J-E(2006) 查看數據表（PDF） - STMicroelectronics

零件编号

产品描述 (功能)

生产厂家

VN5050J-E
(Rev.:2006)

Single channel high side driver for automotive applications

STMicroelectronics 

VN5050J-E

3

Application Information

Application Information

Figure 28. Application schematic

+5V

+5V

VCC

Rprot

STAT_DIS

Rprot

µC

Rprot

INPUT

STATUS

Dld

GND

OUTPUT

VGND

RGND

DGND

3.1

3.1.1

GND Protection Network Against Reverse Battery

Solution 1:

Resistor in the ground line (RGND only). This can be used with any type of load.

The following is an indication on how to dimension the RGND resistor.

1. RGND ≤ 600mV / (IS(on)max).

2. RGND ≥ (−VCC) / (-IGND)

where -IGND is the DC reverse ground pin current and can be found in the absolute

maximum rating section of the device datasheet.

Power Dissipation in RGND (when VCC<0: during reverse battery situations) is:

PD= (-VCC)2/RGND

This resistor can be shared amongst several different HSDs. Please note that the value of

this resistor should be calculated with formula (1) where IS(on)max becomes the sum of the

maximum on-state currents of the different devices.

Please note that if the microprocessor ground is not shared by the device ground then the

RGND will produce a shift (IS(on)max * RGND) in the input thresholds and the status output

values. This shift will vary depending on how many devices are ON in the case of several

high side drivers sharing the same RGND.

15/23

Share Link: