ICX282AKF 查看數據表（PDF） - Sony Semiconductor

零件编号

产品描述 (功能)

生产厂家

ICX282AKF

Diagonal 11mm (Type 2/3) Frame Readout CCD Image Sensor with Square Pixel for Color Cameras

Sony Semiconductor 

ICX282AKF

5. Video signal shading

Set to the standard imaging condition II. With the lens diaphragm at F5.6 to F8, adjusting the luminous

intensity so that the average value of the G/Mg/Ye/Cy channel signal output is 200mV. Then measure the

maximum value (Vmax [mV]) and minimum value (Vmin [mV]) of the G/Mg/Ye/Cy channel signal output

and substitute the values into the following formula.

SH = (Vmax – Vmin)/150 × 100 [%]

6. Dark signal

Measure the average value of the signal output (Vdt [mV]) with the device ambient temperature of 60°C

and the device in the light-obstructed state, using the horizontal idle transfer level as a reference.

7. Dark signal shading

After measuring 6, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark

signal output and substitute the values into the following formula.

∆Vdt = Vdmax – Vdmin [mV]

8. Lag

Adjust the G/Mg/Ye/Cy channel output generated by the strobe light to 150mV. After setting the strobe light

so that it strobes with the following timing, measure the residual signal amount (Vlag). Substitute the value

into the following formula.

Lag = (Vlag/150) × 100 [%]

VD

V1A/V1B/V1C

Strobe light timing

Output

Light

G/Mg/Ye/Cy channel

signal output 150mV

Vlag (lag)

– 17 –

Share Link: