MX29LV320E T/B
COMMAND OPERATIONS (cont'd)
RESET OPERATION
In the following situations, executing reset command will reset device back to Read mode:
• Among erase command sequence (before the full command set is completed)
• Sector erase time-out period
• Erase fail (while Q5 is high)
• Among program command sequence (before the full command set is completed, erase-suspended program
included)
• Program fail (while Q5 is high, and erase-suspended program fail is included)
• Read silicon ID mode
• Sector protect verify
• CFI mode
While device is at the status of program fail or erase fail (Q5 is high), user must issue reset command to reset
device back to read array mode. While the device is in read silicon ID mode, sector protect verify or CFI mode,
user must issue reset command to reset device back to read array mode.
When the device is in the progress of programming (not program fail) or erasing (not erase fail), device will ig-
nore reset command.
P/N:PM1575
REV. 1.3, DEC. 19, 2013
29