B32 查看數據表（PDF） - EPCOS AG

零件编号

产品描述 (功能)

生产厂家

B32

SIOV metal oxide varistors

EPCOS AG 

Block varistors

HighE series

Cautions and warnings

General

1. EPCOS metal oxide varistors (SIOVs) are designed for specific applications and should not be

used for purposes not identified in our specifications, application notes and data books unless

otherwise agreed with EPCOS during the design-in-phase.

2. Ensure suitability of SIOVs through reliability testing during the design-in phase. SIOVs should

be evaluated taking into consideration worst-case conditions.

3. For applications of SIOVs in line-to-ground circuits based on various international and local

standards there are restrictions existing or additional safety measures required.

Storage

1. Store SIOVs only in original packaging. Do not open the package before storage.

2. Storage conditions in original packaging:

Storage temperature:

Relative humidity:

Dew precipitation:

–25 °C … +45 °C

<75% annual average,

<95% on maximum 30 days a year.

Is to be avoided.

3. Avoid contamination of an SIOV’s surface during storage, handling and processing.

4. Avoid storage of SIOVs in harmful environments that can affect the function during long-term

operation (examples given under operation precautions).

5. The SIOV type series should be soldered within the time specified:

SIOV-S, -Q, -LS

24 months

ETFV and SFS types 12 months.

Handling

1. SIOVs must not be dropped.

2. Components must not be touched with bare hands. Gloves are recommended.

3. Avoid contamination of the surface of SIOV electrodes during handling, be careful of the sharp

edge of SIOV electrodes.

Soldering (where applicable)

1. Use rosin-type flux or non-activated flux.

2. Insufficient preheating may cause ceramic cracks.

3. Rapid cooling by dipping in solvent is not recommended.

4. Complete removal of flux is recommended.

Please read Cautions and warnings and

Important notes at the end of this document.

18 11/07

Share Link: