AH183 查看數據表（PDF） - Diodes Incorporated.

零件编号

产品描述 (功能)

生产厂家

AH183

LOW POWER HALL EFFECT SWITCH

Diodes Incorporated. 

AH182/AH183

LOW POWER HALL EFFECT SWITCH

Features

• Micropower operation

• 2.5V to 5.5V battery operation

• Offset Canceling Technology

• Superior temperature stability

• Extremely Low Switch-Point Drift

• Insensitive to Physical Stress

• -40°C to 85°C operating temperature

• Lead Free packages: SIP-3L and SC59 (Commonly

known as SOT23 in Asia)

• SIP-3L and SC59: Available in “Green” Molding

Compound (No Br, Sb)

• Lead Free Finish / RoHS Compliant (Note 1)

General Description

AH182/AH183 is a three-terminal Hall effect sensor device with

an output driver, mainly designed for battery–operation,

hand-held equipment (such as cellular and cordless phones, and

PDA’s) The total operation power is down to 15uW in the

2.75V supply.

The south pole of sufficient strength will turn the output on in

SIP-3L but the north pole of sufficient strength will turn the output

on in SC59 package. The output will be turned off under no

magnetic field.

While the magnetic flux density (B) is larger than operation point

(Bop), the output will be turned on (low), the output is held until

B is lower than the release point (Brp), then turned off. The

difference between AH182 and AH183 is that the former

consumes less power than that of the latter in the Hall sensor

operation.

Applications

• Cover detector

• Speed measurement

• Home safety

Typical Circuit *

2.5~5.5V

C

AH182/AH183

RL

Output

Gnd

* C is for power stabilization and to strengthen the noise immunity, the recommended capacitance is 10nF~100nF.

RL is the pull-up resistor, the recommended resistance is 10Kohm~100Kohm.

AH182/AH183 Rev. 8

DS31024

1 of 10

www.diodes.com

NOVEMBER 2009

© Diodes Incorporated

Share Link: