Z8018010VSC 查看數據表（PDF） - Zilog

零件编号

产品描述 (功能)

生产厂家

Z8018010VSC

ENHANCED Z180 MICROPROCESSOR

Zilog 

Zilog

STANDARD TEST CONDITIONS

The DC Characteristics and Capacitance sections above

apply to the following standard test conditions, unless oth-

erwise noted. All voltages are referenced to GND (0V).

Positive current flows in to the referenced pin.

All AC parameters assume a load capacitance of 100 pF.

Add 10 ns delay for each 50 pF increase in load up to a

maximum of 200 pF for the data bus and 100 pF for the ad-

dress and control lines. AC timing measurements are ref-

erenced to 1.5 volts (except for CLOCK, which is refer-

enced to the 10% and 90% points). The Ordering

Information section lists temperature ranges and product

numbers. Package drawings are in the Package Informa-

tion section. Refer to the Literature List for additional doc-

umentation.

ABSOLUTE MAXIMUM RATINGS

Item

Supply Voltage

Input Voltage

Operating Temperature

Extended Temperature

Storage Temperature

Symbol

Vcc

Vin

Topr

Text

Tstg

Note: Permanent LSI damage may occur if maximum

ratings are exceeded. Normal operation should be under

recommended operating conditions. If these conditions

are exceeded, it could affect reliability of LSI.

Z80180/Z8S180/Z8L180

Enhanced Z180 Microprocessor

From Output

Under Test

+5 V

1

2.1k

100 pF

250

µA

Figure 19. AC Load Capacitance Parameters

Value

Unit

-0.3 ~ +7.0

V

-0.3 ~ Vcc +0.3

V

0 ~ 70

°C

-40 ~ 85

°C

-55 ~ +150

°C

DS971800401

PRELIMINARY

1-23

Share Link: